2020

RESET FILTERS    Category:   
Product Type:
STB ISO 20957-1-2020
STB ISO 20957-1-2020
Stationary simulators. Part 1. General safety requirements and test methods
STB ISO 21010-2020
STB ISO 21010-2020
Cryogenic vessels. Gas and material compatibility
STB ISO 21013-2-2020
STB ISO 21013-2-2020
Cryogenic vessels. Safety valves for cryogenic service. Part 2. Non-reclosable safety valves
STB ISO 21013-3-2020
STB ISO 21013-3-2020
Cryogenic vessels. Safety valves for cryogenic service. Part 3. Determination of dimensions and capacity
STB ISO 21013-4-2020
STB ISO 21013-4-2020
Cryogenic vessels. Safety valves for cryogenic service. Part 4. Pilot operated safety valves
STB ISO 22000-2020
STB ISO 22000-2020
Food safety management systems. Requirements for organizations participating in the food chain
STB ISO 31000-2020
STB ISO 31000-2020
Risk management. Guidelines
STB ISO 37001-2020
STB ISO 37001-2020
Anti-bribery management systems. Requirements and guidance for use
STB ISO 3887-2020
STB ISO 3887-2020
Steel. Determination of the depth of decarburization
STB ISO 4017-2020
STB ISO 4017-2020
Hex head screws. Accuracy classes A and B
STB ISO 45001-2020
STB ISO 45001-2020
Occupational health and safety management systems. Requirements and guidance for use
STB ISO 5631-2-2020
STB ISO 5631-2-2020
Paper and cardboard. Determination of color by the radiance factor (reflectance factor) under diffuse illumination. Part 2. Outdoor daylight conditions (D65 / 10 °)
STB ISO 642-2020
STB ISO 642-2020
Steel. End quench hardenability test (Jominy test)
STB ISO 6506-2-2020
STB ISO 6506-2-2020
Metallic materials. Brinell hardness measurement. Part 2. Verification and calibration of hardness testers
STB ISO 6506-3-2020
STB ISO 6506-3-2020
Metallic materials. Brinell hardness measurement. Part 3. Calibration of reference hardness blocks
STB ISO 6507-2-2020
STB ISO 6507-2-2020
Metallic materials. Vickers hardness measurement. Part 2. Verification and calibration of hardness testers
STB ISO 6507-3-2020
STB ISO 6507-3-2020
Metallic materials. Vickers hardness measurement. Part 3. Calibration of reference hardness blocks
STB ISO 683-1-2020
STB ISO 683-1-2020
Heat-treatable, alloyed and automatic steels. Part 1. Unalloyed steels for quenching and tempering
STB ISO 683-2-2020
STB ISO 683-2-2020
Heat-treatable, alloyed and automatic steels. Part 2. Alloy steels for quenching and tempering
STB ISO 683-3-2020
STB ISO 683-3-2020
Heat-treatable, alloyed and automatic steels. Part 3. Case hardened steels

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!