GOST R 55260.1.1-2013

ГОСТ Р 55260.1.1-2013

Hydro power plants. Part 1-1. Hydraulic structures of hydropower stations. General safety requirements

Гидроэлектростанции. Часть 1-1. Сооружения ГЭС гидротехнические. Требования безопасности

Status: Effective - Introduced for the first time. IUS 2-2015

The objects of technical regulation in this standard are hydraulic structures of hydraulic riverbed and pumped storage power plants, their design processes, including exploration, construction, operation, overhaul, reconstruction, conservation and liquidation, as well as the implementation of measures to prevent, localize and eliminate emergency situations caused by accidents. hydraulic structures of these power plants. This standard applies to: - concrete and reinforced concrete dams (gravity, buttress and arch); - earth dams and dams (ground bulk, ground alluvial, stone-earthen, and rock embankment); - culverts; - buildings of hydroelectric stations and pumped storage power plants; - water intake facilities and septic tanks; - conduits of closed cross section; - channels; - retaining walls; - fish crossing and fish protection facilities. This standard establishes general requirements for the safety of hydraulic structures at all stages of their life cycle, during which engineering surveys, design, construction, operation (including current repairs), reconstruction, major repairs, conservation and liquidation of structures are carried out. This standard does not apply to the safety of technological processes corresponding to the functional purpose of a hydraulic structure. At the same time, possible hazardous effects of these technological processes on the condition of facilities and their level of safety are taken into account

Объектами технического регулирования в настоящем стандарте являются гидротехнические сооружения гидравлических русловых и гидроаккумулирующих электростанций, процессы их проектирования, включая изыскания, строительства, эксплуатации, капитального ремонта, реконструкции, консервации и ликвидации, а также осуществления мероприятий по предупреждению, локализации и ликвидации чрезвычайных ситуаций, обусловленных авариями гидротехнических сооружений этих электростанций. Настоящий стандарт распространяется на: - бетонные и железобетонные плотины (гравитационные, контрфорсные и арочные); - грунтовые плотины и дамбы (грунтовые насыпные, грунтовые намывные, каменно-земляные и каменно-набросные); - водопропускные сооружения; - здания гидроэлектрических станций и гидроаккумулирующих электростанций; - водозаборные сооружения и отстойники; - водоводы замкнутого поперечного сечения; - каналы; - подпорные стены; - рыбопропускные и рыбозащитные сооружения. Настоящий стандарт устанавливает общие требования к безопасности гидротехнических сооружений на всех этапах их жизненного цикла, в течение которого осуществляются инженерные изыскания, проектирование, строительство, эксплуатация (в том числе текущие ремонты), реконструкция, капитальный ремонт, консервация и ликвидации сооружения. Настоящий стандарт не распространяется на безопасность технологических процессов, соответствующих функциональному назначению гидротехнического сооружения. При этом подлежат учету возможные опасные воздействия этих технологических процессов на состояние сооружений и уровень их безопасности

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 9/6/2013

SKU: RUSS73967

Price: $639.00




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 27 Power and heat engineering »

PromExpert » SECTION IV. INDUSTRIAL SAFETY » II Industrial safety requirements for operation of a hazardous production facility » 4 Safety requirements for hydraulic structures » 4.3 Hydraulic structures of power facilities »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.1 Operation of industrial buildings and structures »

ISO classifier » 27 ENERGY AND HEATING TECHNOLOGY » 27.140 Hydropower »

National standards » 27 ENERGY AND HEATING TECHNOLOGY » 27.140 Hydropower »


The Document References:

GOST 12.1.046-85: Occupational safety standards system. Building. Lighting of building sites

GOST 12.3.016-87: Occupational safety standards system. Building construction anticorrosive protective works. Safety requirements

GOST 12.4.059-89: Occupational safety standards system. Construction. Protective inventory safeguards. General specifications

GOST 12.4.087-84: Occupational safety standard system. Building. Building helmets. Specifications

GOST 12.4.107-82: Occupational safety standards system. Building. Safety ropes. General safety requirements

GOST 12071-2000: Soils. Sampling, packing, transportation and storage of samples

GOST 12248-2010: Soils. Laboratory methods for determining the strength and strain characteristics

GOST 12536-79: Soils. Methods of laboratory granulometric (grain-size) and microaggregate distribution

GOST 19912-2012: Soils. Field test methods: cone penetration test and dynamic probing

GOST 20276-2012: Soils. Field methods for determining the strength and strain characteristics

GOST 20522-2012: Soils. Methods of statistical treatment of test results

GOST 21.110-95: System of building design documents Rules of developing specifications for equipment, products and materials

GOST 21.112-87: System of design documentation for construction. Hoisting-and-conveying machinery. Symbols

GOST 21.113-88: System of design documentation for construction. Presentation of dimensional accuracy data

GOST 21.114-95: System of design documents for construction. Rules for execution of sketch drawings of general views of non-standard products

GOST 21.204-93: System of construction design documents. Graphical symbols and signs of elements of general layouts and transport structures

GOST 21.205-93: System of design documents for construction. Elements оf sanitary engineering systems - symbols

GOST 21.206-2012: System of design documents for construction. Symbols for presentation of pipelines

GOST 21.302-96: System of design documents for construction Graphic symbols for engineering geological investigation documents

GOST 21.401-88: System of design document for construction. Production technology. Main requirements to working drawings.

GOST 21.403-80: System of design documents for construction. Graphic symbols in diagrams. Power installations

GOST 21.404-85: System of design documents for construction. Industrial process automation. Instrumentation symbols for use in diagrams

GOST 21.408-93: System of design documents for construction. Rules of industrial process automation working documentation execution

GOST 21.501-2011: System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions

GOST 21.508-93: System of building design documents. Rules of fulfillment of working documentation of general layouts of enterprises, buildings and civil housing objects

GOST 21.513-83: System of building documents. Anticorrosive protection of building structures. Working drawings

GOST 21.607-82: System of building design documents. Electric lighting for industrial project site. Working drawings

GOST 21.611-85: System of building design documents. Centralized power supply control. Graphical and letter designation of the type and contents of information

GOST 21.613-88: System of building design documents. Power electrical equipment. Working drawings

GOST 21.614-88: System of design documents for construction. Graphic symbols of electrical equipment and wiring on plans

GOST 21.615-88: System of design documentation for construction. Drawings for hydro-technical structures. Rules of execution

GOST 21779-82: System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances

GOST 21780-2006: System of ensuring the accuracy of geometrical parameters in construction. Accuracy calculation

GOST 22733-2002: Soils. Laboratory method for determination of maximum density.

GOST 23061-2012: Soils. Methods for radioisotope measurement of density and humidity

GOST 23161-2012: Soils. Method of laboratory determination of subsiding characteristics

GOST 23278-78: Soils. Fields methods of permeability tests

GOST 23615-79: System of ensuring accuracy of geometrical parameters in construction. Statistical analysis of accuracy

GOST 23616-79: System of ensuring of geometrical accuracy of parameters in construction. Control of accuracy

GOST 23740-79: Soils. Methods of laboratory determination of organic composition

GOST 24846-2012: Soils. Methods of measuring the strains of structures and building bases

GOST 24847-81: Soils. Determination methods of seasonable depth of freezing

GOST 25100-95: Soils. Classification

GOST 25358-2012: Soils. Field method of determining temperature

GOST 25584-90: Soils. Laboratory methods for determination of filtration factor

GOST 26262-84: Soils field methods for determining depth of thawing

GOST 26263-84: Soils. Laboratory method for determining thermal conductivity of frozen soils

GOST 26433.0-85: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. General

GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements

GOST 26433.2-94: System of ensuring geometric parameters accuracy in building. Rules for measuring parameters of buildings and works

GOST 26607-85: System of ensuring of geometrical parameters accuracy in construction. Functional tolerances

GOST 27217-2012: Soils. Field method for determining of frost-heave specific tangential forces

GOST 27321-87: Demountable tubular scaffold for construction works. Specification.

GOST 28012-89: Demountable travelling stage. Specifications

GOST 28347-89: Rolling scaffold with movable working place. Specifications

GOST 28514-90: Construction geotechnics. Determination of soil density by volume displacement method

GOST 28622-2012: Soils. Laboratory method for determination of frost-heave degree

GOST 28984-2011: Modular coordination of construction dimensions. General.

GOST 30416-2012: Soils. Laboratory testing. General requirements

GOST 30672-2012: Soils. Field testing. General

GOST 5180-84: Soils. Laboratory methods for determination

GOST 5686-2012: Sоils. Fiеld tеst mеthоds bу рilеs

GOST R 12.3.048-2002: Occupational safety standards system. Building. Hydraulic excavation. Safety requirements

GOST R 21.1001-2009: System of design documents for construction. General principles

GOST R 21.1003-2009: System of design documents for construction. Registration and storage rules design documentation

GOST R 21.1101-2009: System of design documents for construction. Main requirements for design and working documents

GOST R 21.1709-2001: System of design documents for construction. Rules of executing of working documentation for irrigation system

GOST R 50849-96: Safety belts constructions. General specifications. Test methods

GOST R 51872-2002: Executive geodetic documentation in construction. Performance rules

GOST R 52085-2003: Formworks. General specifications

GOST R 52086-2003: Formworks. Terms and definitions

GOST R 53582-2009: Soils. Method of determination of thawing soil shear resistance

GOST R 53778-2010: Buildings and constructions. Rules of inspection and monitoring of the technical condition. General requirements

SNiP 11-02-96: Engineering surveying for construction. fundamentals

SNiP 12-03-2001: Labor safety in construction industry

SNiP 12-04-2002: Safety in construction. Part 2. Construction works

SNiP 2.06.07-87: Retaining walls, ship locks, fish ways, and fish-protection devices

SNiP 2.06.09-84: Hydrotechnical tunnels

SNiP 22-02-2003: Engineering protection of territories, buildings and facilities against hazardous geological processes. Basic provisions

SP 126.13330.2012: Survey operations in construction

SP 14.13330.2011: Construction in seismic regions.

SP 16.13330.2011: Steel structures

SP 20.13330.2011: Loads and impacts

SP 22.13330.2011: Buildings and structures foundations

SP 23.13330.2011: Foundation of hydraulic structures

SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85

SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants

SP 39.13330.2012: Rock fill dams

SP 40.13330.2012: Concrete and reinforced concrete dams

SP 41.13330.2012: Concrete and reinforced concrete hydraulic structures

SP 48.13330.2011: Organization of construction

SP 58.13330.2012: Hydraulic Structures. Basic statements

SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.

Customers Who Viewed This Item Also Viewed:

Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Blanks for marine shafts and rudder stocks. Specifications
Language: English
Price: $216.00

YOUR ORDERING MADE EASY!

BelarusLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!