GOST IEC 61029-1-2012

ГОСТ IEC 61029-1-2012

Transportable motor-operated electric tools. General safety requirements and testing methods

Машины переносные электрические. Общие требования безопасности и методы испытаний

Status: Effective - Introduced for the first time. IUS 8-2013

This standard establishes the safety requirements and test methods that are common to all electric portable machines. The standard applies to electric machines driven by an electric or electromagnetic engine, intended for use indoors and outdoors, and having all of the following features: a) easily moved by one person; for convenience of movement can be supplied with devices such as handles, wheels, etc .; b) are used in a secure stationary position without fastening or with fastening using, for example, fast-clamping devices, bolting, etc .; c) operate under operator control; d) not designed to work in continuous production; e) designed to connect to an electrical power source using an electrical cord with a plug; f) operate at a maximum rated voltage of 250 V with alternating single-phase or direct current and 440 V with alternating three-phase current; g) have a maximum rated power consumption of 2500 W with alternating single-phase or direct current and 4000 W with alternating three-phase current

Настоящий стандарт устанавливает требования безопасности и методы испытаний, являющиеся общими для всех электрических переносных машин. Стандарт распространяется на электрические машины с приводом от электрического или электромагнитного двигателя, предназначенные для эксплуатации в помещениях и на открытом воздухе и имеющие все указанные ниже особенности: a) легко перемещаются одним человеком; для удобства перемещения могут снабжаться приспособлениями типа ручек, колес и т. п.; b) используются в надежном стационарном положении без закрепления или с закреплением с помощью, например, быстрозажимных устройств, болтовых креплений и т. п.; c) работают под контролем оператора; d) не рассчитаны на работу при непрерывном производстве; e) предназначены для подключения к.электрическому источнику питания с помощью электрического шнура с вилкой; f) работают при максимальном номинальном напряжении 250 В при переменном однофазном или постоянном токе и 440 В при переменном трехфазном токе; g) имеют максимальную номинальную потребляемую мощность 2500 Вт при переменном однофазном или постоянном токе и 4000 Вт при переменном трехфазном токе

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 66

Approved: Federal Agency for Technical Regulation and Metrology, 12/19/2012

SKU: RUSS73332

Price: $774.00




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 25 Mechanical Engineering »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 004/2011 TR CU. About safety of low voltage equipment » Regulations and standards (to TR CU 004/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.15 Testing and control of products of electronic, optical and electrical industry » 4.15.1 Electric machines, electrical equipment and materials »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.2 Machines and equipment for special purposes » 4.13.2.7 Machines and equipment for construction industry »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.2 Machines and equipment for special purposes » 4.13.2.1 Machines, parts and accessories »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.140 Hand tools » 25.140.20 Electrical tools »

National standards » 25 MECHANICAL ENGINEERING » 25.140 Hand tools » 25.140.20 Electrical tools »


The Document References:

GOST 12.2.006-87: Safety of the electronic mains-connected and similar devices intended for everyday and similar general-purpose use

GOST 12.2.013.0-91: Electrical hand-held tools

GOST 14254-80: Electrotechnical articles. Enclosures. Degrees of protections. Designations. Test methods

GOST 26413.0-85: Power cords

GOST 27487-87: Electrical equipment for industrial. General requirements and test methods

GOST 27570.0-87: Safety of household appliances and similar devices

GOST 28190-89: Appliance couplers for household and similar general purposes. Requirements and methods of tests

GOST 29146.1-91: Plugs, socket-outlets

GOST 29146.2-91: Electric connectors for industrial use

GOST 7396.1-89: Plugs and socket-outlets for domestic and similar general use

GOST 8865-93: Electrical insulation system. Thermal evalution and classification

The Document is Referenced By:

GOST IEC 61029-2-10-2013: Safety of transportable motor-operated electric tools. Part 2-10. Particular requirements for cutting-off grinders

GOST IEC 61029-2-1-2011: Electric transportable tools. Specific safety requirements and methods of circular saws testing

GOST IEC 61029-2-12-2014: Safety of transportable motor-operated electric tools. Part 2-12. Particular requirements for threading machines

GOST IEC 61029-2-2-2011: Electric transportable tools. Particular safety requirements and test methods of radial arm saws

GOST IEC 61029-2-3-2011: Electric transportable tools. Particular safety requirements and test methods of planers and thicknesses

GOST IEC 61029-2-6-2011: Electric transportable tools. Particular safety requirements and methods of diamond drills with water supply test

GOST IEC 61029-2-7-2011: Electric transportable tools. Particular safety requirements and methods of diamond saws with water supply

GOST IEC 61029-2-8-2011: Electric transportable tools. Particular safety requirements and methods of testing single spindle vertical moulders

Customers Who Viewed This Item Also Viewed:

Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Technical Regulations of the Eurasian Economic Union "On the Safety of Chemical Products"
Language: English
Price: $102.96
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.85
Technical Regulations of Customs Union, On safety of machines and equipment
Language: English
Price: $110.40
Determination of categories of rooms, buildings and external installations for explosion and fire hazards
Language: English
Price: $148.50
Basic and safety principles for man-machine interface, marking and identification. Identification of conductors by colours and alphanumerics.
Language: English
Price: $57.42
Railway rails. General specifications.
Language: English
Price: $1,184.04
Technical regulations of Customs Union. On the safety of a personal protective equipment
Language: English
Price: $1,703.16
Technical regulations of Customs Union. On the safety of agricultural and forestry tractors and trailers
Language: English
Price: $98.40
Rostehnadzor (RTN) Order N 116 of 25.03.2014 "On approval of the Federal rules and regulations in the field of industrial safety". Rules of industrial safety of hazardous production facilities that use equipment operating under excess pressure. Reg. № 323
Language: English
Price: $972.28
Non-destructive testing. Capillary methods. General requirements
Language: English
Price: $121.77
Steel and alloys. Methods for detection and determination of grain size
Language: English
Price: $170.28
Classification of automobile roads. General parameters and requirements
Language: English
Price: $87.30
Raw material and food-stuff. Method for determination of arsenic
Language: English
Price: $113.49
Nickel, nickel and copper-nickel alloys treated by pressure. Grades
Language: English
Price: $179.45
Steel. Metallographic methods for the determination of non-metallic inclusions
Language: English
Price: $218.95
Jet fuels. Specifications
Language: English
Price: $86.13
Power cables with plastic insulation for rated voltages from 6 up to and including 35 kV. General specifications
Language: English
Price: $224.71
Low-voltage electrical installations. Part 5-52. Selection and erection of electrical equipment. Wiring systems
Language: English
Price: $422.53
Dry-type transformers. General specifications
Language: English
Price: $258.32

YOUR ORDERING MADE EASY!

BelarusLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!