GOST R 52320-2005

ГОСТ Р 52320-2005

Electricity metering equipment (а.с). General requirements. Tests and test conditions. Part 11. Meters for electric energy

Аппаратура для измерения электрической энергии переменного тока. Общие требования. Испытания и условия испытаний. Часть 11. Счетчики электрической энергии

Status: Not effective - Canceled. Information about registration 1035-st dated November 22, 2012 (official website of Rosstandart); IUS 6-2013

The standard applies to equipment for measuring electrical energy used both indoors and outdoors, and establishes requirements for the manufacture and testing of equipment for measuring electrical energy when used in AC networks of 50 or 60 Hz at voltages up to 600 V. The standard applies to electromechanical and static meters used inside and outside the premises containing the measuring element and the counting mechanism (s) enclosed in the meter body. It also applies to the operation indicator (s) and test output (s). If the meter has a measuring element for measuring energy of more than one type (meters for different types of energy) or if other functional elements are enclosed in the meter case, such as maximum readings, electronic tariff recorders, time switches, remote control receivers, data interfaces and etc., then the relevant standards or regulatory documents for these elements are applied. The standard does not apply to: a) portable meters; b) interfaces to the counter counting mechanism; c) reference meters. Rack meters are not subject to the mechanical requirements of the standard.

Стандарт распространяется на аппаратуру для измерения электрической энергии, применяемую как внутри, так и снаружи помещений, и устанавливает требования к изготовлению и испытаниям аппаратуры для измерения электрической энергии при использовании в сетях переменного тока частотой 50 или 60 Гц при напряжении до 600 В. Стандарт распространяется на электромеханические и статические счетчики, применяемые внутри и снаружи помещений, содержащие измерительный элемент и счетный(е) механизм(ы), заключенные в корпус счетчика. Он также распространяется на индикатор(ы) функционирования и испытательный(е) выход(ы). Если счетчик имеет измерительный элемент для измерения энергии более чем одного вида (счетчики на энергию разных видов) либо если в корпус счетчика заключены другие функциональные элементы, такие как показатели максимума, электронные регистраторы тарифов, переключатели по времени, приемники дистанционного управления, интерфейсы передачи данных и т.д., то тогда применяют соответствующие стандарты или нормативные документы на эти элементы. Стандарт не распространяется на: а) переносные счетчики; б) интерфейсы к счетному механизму счетчика; в) эталонные счетчики. На счетчики, устанавливаемые в стойке, механические требования стандарта не распространяются.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 34

Approved: Federal Agency for Technical Regulation and Metrology, 3/15/2005

SKU: RUSS71274

Price: $446.93




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 17 Metrology and measurements. Physical phenomena »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 020/2011 TR CU. Electromagnetic compatibility of technical means » Regulations and standards (to ТР ТС ТС 020/2011) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 3 Activities of testing laboratories » 3.2 Technical equipment of testing laboratories » 3.2.2 Measuring instruments and test equipment » 3.2.2.4 Instruments for electrical and magnetic measurements »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.220 Electricity. Magnetism. Electrical and magnetic measurements » 17.220.01 Electricity. Magnetism. General aspects »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.220 Electricity. Magnetism. Electrical and magnetic measurements » 17.220.01 Electricity. Magnetism. General aspects »

National Standards for KGS (State Standards Classification) » Latest edition » P Measuring devices. Automation and computing facilities » P3 Instruments for electrical and magnetic measurements » P32 Instruments for measuring electrical power and amount of electricity »


The Document References:

GOST 14254-96: Degrees of protection provided by enclosures (IP Code)

GOST 1983-2001: Voltage transformers. General specifications

GOST 2.601-2006: Unified system for design documentation. Exploitative documents

GOST 22261-94: Measuring instruments for electrical

GOST 23217-78: Direct-reading indicating electrical measuring instruments. Marking symbols

GOST 25372-95: Symbols for alternating-current electricity meters

GOST 26.008-85: Lettering for inscriptions applied by engraving method. Executive dimensions

GOST 26.020-80: Types for means of measuring and automation. Inscription and main dimensions

GOST 27483-87: Fire hazard testing. Test methods. Glow-wire test and guidance

GOST 28199-89: Basic environmental, testing procedures. Part 2. Tests. Test A: Cold

GOST 28200-89: Basic environmental testing procedures. Part 2. Tests. Test B: Dry heat

GOST 28202-89: Basic environmental testing. Part 2. Tests. Test Sa: Simulated solar radiation at ground level

GOST 28203-89: Basic environmental testing procedures. Part 2. Tests. Test Fc and guidance: Vibration ( sinusoidal )

GOST 28207-89: Basic environmental testing procedures. Part 2. Tests. Test Ka: Salt mist

GOST 28213-89: Basic environmental testing prosedures. Part 2. Tests. Test Ea and guidance: Shock

GOST 28216-89: Basic environmental testing procedures. Part 2. Tests. Test Db and guidance: damp heat, cyclic (12 + 12 hour cycle)

GOST 29322-92: Standard voltages

GOST 30012.1-2002: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 1. Definitions and general requirements common to all parts

GOST 7746-2001: Current transformers. General specifications

GOST 8.401-80: State system for ensuring the uniformity of measurements. Accuracy classes of measuring instruments. General requirements

GOST 8865-93: Electrical insulation system. Thermal evalution and classification

GOST 9.048-89: Unified system of corrosion and ageing protection. Technical items. Methods of laboratory tests for mould resistance

GOST 9181-74: Electrical measuring instruments. Packing, marking, transport and storage

GOST R 1.0-92: State system for standardization of the Russian Federation. Basic principles

GOST R 1.2-92: State system for standardization of the Russian Federation. Procedure for developing state standards

GOST R 50460-92: Mark of conformity for obligatory certification form, dimensions dnd technical requirements

GOST R 51317.4.12-99: Electromagnetic compatibility of technical equipment. Oscillatory waves immunity. Requirements and test methods

GOST R 51317.4.2-99: Electromagnetic compatibility of technical equipment. Immunity to electrostatic discharge. Requirements and test methods

GOST R 51317.4.3-2006: Electromagnetic compatibility of technical equipment. Radio-frequency electromagnetic field immunity. Requirements and test methods.

GOST R 51317.4.3-99: Electromagnetic compatibility of technical equipment. Radiated, radio-frequency, electromagnetic field immunity. Requirements and test methods

GOST R 51317.4.4-99: Electromagnetic compatibility of technical equipment. Immunity to electrical fast transient/burst. Requirements and test methods

GOST R 51317.4.5-99: Electromagnetic compatibility of technical equipment. Microsecond high energy pulse disturbance immunity. Requirements and test methods

GOST R 51317.4.6-99: Electomagnetic compatibility of technical equipment. Immunity to conducted disturbance induced by radio-frequency fields. Requirements and test methods

GOST R 51318.22-2006: Electromagnetic compatibility of technical equipment. Information technology equipment. Man-made radio disturbance. Limits and methods of measurement

GOST R 51318.22-99: Electromagnetic compatibility of technical equipment. Man-made radio disturbance from information technology equipment. Limits and test methods

GOST R 51350-99: Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements

GOST R 52321-2005: Electricity metering equipment (а.с). Particular requirements. Part 11. Electromechanical meters for active energy (classes 0,5; 1 and 2)

PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation

GOST R IEC 335-1-94: Safety of household and similar electrical appliances. General requirements and test methods

The Document is Referenced By:

GOST 25990-83: Electrical active energy meters, accuracy class 2,0. Acceptance control

GOST 4.392-85: Product-quality index system. Electricity meters. Index nomenclature

GOST R 52321-2005: Electricity metering equipment (а.с). Particular requirements. Part 11. Electromechanical meters for active energy (classes 0,5; 1 and 2)

GOST R 52322-2005: Electricity metering equipment (а.с). Particular requirements. Part 21. Static meters for active energy (classes 1 and 2)

GOST R 52323-2005: Electricity metering equipment (а.с.). Particular requirements. Part 22. Static meters for active energy classes (0,2S and 0,5S)

GOST R 52425-2005: Electricity metering equipment (a.c.). Particular requirements. Part 23. Static meters for reactive energy

MI 3322-2011: Recommendation. State system for ensuring uniformity of measurements. Electric meters of active and reactive energy. Methods of verification at the sites of operation using a set of portable calibration tools produced by Mars-Energo

STB GOST R 52321-2007: Equipment for measurement of electrical power of alternating current. Particular requirements. Part 11. Electric and mechanical recorders of active energy of accuracy class: 0,5; 1 and 2

STB GOST R 52322-2007: Equipment for measurement of electrical power of alternating current. Particular requirements. Part 21. Static recorders of active energy of accuracy classes: 1 and 2

STB GOST R 52323-2007: Equipment for measurement of electrical power of alternating current. Particular requirements. Part 22. Static recorders of active energy of accuracy classes: 0,2 S and 0,5 S

STB GOST R 52425-2007: Equipment for measurement of electrical power of alternating current. Particular requirements. Part 23. Static recorders of reactive energy

Customers Who Viewed This Item Also Viewed:

Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Technical Regulations of the Eurasian Economic Union "On the Safety of Chemical Products"
Language: English
Price: $102.96
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.85
Technical Regulations of Customs Union, On safety of machines and equipment
Language: English
Price: $110.40
Determination of categories of rooms, buildings and external installations for explosion and fire hazards
Language: English
Price: $148.50
Basic and safety principles for man-machine interface, marking and identification. Identification of conductors by colours and alphanumerics.
Language: English
Price: $57.42
Railway rails. General specifications.
Language: English
Price: $1,184.04
Technical regulations of Customs Union. On the safety of a personal protective equipment
Language: English
Price: $1,703.16
Technical regulations of Customs Union. On the safety of agricultural and forestry tractors and trailers
Language: English
Price: $98.40
Rostehnadzor (RTN) Order N 116 of 25.03.2014 "On approval of the Federal rules and regulations in the field of industrial safety". Rules of industrial safety of hazardous production facilities that use equipment operating under excess pressure. Reg. № 323
Language: English
Price: $972.28
Non-destructive testing. Capillary methods. General requirements
Language: English
Price: $121.77
Steel and alloys. Methods for detection and determination of grain size
Language: English
Price: $170.28
Classification of automobile roads. General parameters and requirements
Language: English
Price: $87.30
Raw material and food-stuff. Method for determination of arsenic
Language: English
Price: $113.49
Nickel, nickel and copper-nickel alloys treated by pressure. Grades
Language: English
Price: $179.45
Steel. Metallographic methods for the determination of non-metallic inclusions
Language: English
Price: $218.95
Jet fuels. Specifications
Language: English
Price: $86.13
Power cables with plastic insulation for rated voltages from 6 up to and including 35 kV. General specifications
Language: English
Price: $224.71
Low-voltage electrical installations. Part 5-52. Selection and erection of electrical equipment. Wiring systems
Language: English
Price: $422.53
Dry-type transformers. General specifications
Language: English
Price: $258.32

YOUR ORDERING MADE EASY!

BelarusLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!