GOST 23624-2001

ГОСТ 23624-2001

Measuring laboratory current transformers. General specifications

Трансформаторы тока измерительные лабораторные. Общие технические условия

Status: Effective

The standard applies to measuring laboratory current transformers intended for use in AC circuits with nominal voltages from 0.66 to 35 kV inclusively with a frequency of 50 and 60 Hz, from 400 Hz to 10 kHz for electrical measurements and calibration of m

Стандарт распространяется на измерительные лабораторные трансформаторы тока, предназначенные для использования в цепях переменного тока с номинальными напряжениями от 0,66 до 35 кВ включительно частотой 50 и 60 Гц, от 400 Гц до 10 кГц при электрических из

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 20

Approved: State Committee of the Russian Federation for Standardization and Metrology, 4/11/2002

SKU: RUSS65908

Price: $250.28




The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 3 Activities of testing laboratories » 3.2 Technical equipment of testing laboratories » 3.2.2 Measuring instruments and test equipment » 3.2.2.4 Instruments for electrical and magnetic measurements »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.220 Electricity. Magnetism. Electrical and magnetic measurements » 17.220.20 Measurement of electrical and magnetic quantities »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.220 Electricity. Magnetism. Electrical and magnetic measurements » 17.220.20 Measurement of electrical and magnetic quantities »

National Standards for KGS (State Standards Classification) » Latest edition » P Measuring devices. Automation and computing facilities » P3 Instruments for electrical and magnetic measurements » P31 Instruments for measuring voltage and current »


As a Replacement Of:

GOST 23624-79: Metering laboratory current transformers

The Document References:

GOST 10434-82: Electric contact connections. Classification. General technical requirements

GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements

GOST 12.2.007.3-75: Occupational safety standard system. Electrotechnical devices for voltage more than 1 000 v

GOST 12.3.019-80: Occupational safety standards system. Electrical tests and measurements. General safety requirements

GOST 12.4.026-76: Signal colors and safety signs

GOST 14192-96: Cargo marking

GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation

GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 1516.2-97: Electrical equipment and installations for a.c. voltage 3 kV and higher. General methods of dielectric tests

GOST 15543.1-89: Electrical articles. General requirements for environmental climatic aspects stability

GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions

GOST 16962.1-89: Electrical articles. Test methods as to environments climatic factors resistance

GOST 18425-73: Complete, filled transport packages. Vertical impact test by dropping

GOST 18685-73: Current and voltage transformers. Terms and definitions

GOST 19880-74: Electrotechnics. Common concepts. Terms and definitions

GOST 2.601-95: Operational documents

GOST 21130-75: Electrical articles. Grounding terminals and grounding signs

GOST 22261-94: Measuring instruments for electrical

GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods

GOST 23217-78: Direct-reading indicating electrical measuring instruments. Marking symbols

GOST 28596-90: Standard frequencies

GOST 2933-83: Low-voltage electrical apparatus. Methods of tests

GOST 3484.1-88: Power transformers. Electromagnetic test methods

GOST 403-73: Electrical apparatus for voltages up to 1000 V. Temperature rise limits of devices parts

GOST 7746-2001: Current transformers. General specifications

GOST 8.217-87: State system for ensuring the uniformity of measurements. Current transformers. Calibration methods

GOST 8.550-86: State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means of measuring sinusoidal current ratio

GOST 8024-90: Alternating current apparatus and devices for voltages above 1000 V. Temperature rise at continuous duty. Norms and test methods

GOST 8865-93: Electrical insulation system. Thermal evalution and classification

GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods

GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture

The Document is Referenced By:

GOST 8.217-2003: State system for ensuring the uniformity of measurements. Current transformers. Verification procedure

GOST R 56750-2015: Electricity metering equipment (a.c.). Particular requirements. Meters with analogue inputs connected to the low-power sensor (electronic transformers) of voltage and current

GOST R 8.859-2013: State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of current ratio and phase displacement for sinusoidal current

ST RK 1531-2006: Locomotives of main railways of 1520 mm gage. AC electric rotating tractive machinery. Requirements for acceptance programmes and test procedures

Customers Who Viewed This Item Also Viewed:

Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Technical Regulations of the Eurasian Economic Union "On the Safety of Chemical Products"
Language: English
Price: $102.96
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.85
Technical Regulations of Customs Union, On safety of machines and equipment
Language: English
Price: $110.40
Determination of categories of rooms, buildings and external installations for explosion and fire hazards
Language: English
Price: $148.50
Basic and safety principles for man-machine interface, marking and identification. Identification of conductors by colours and alphanumerics.
Language: English
Price: $57.42
Railway rails. General specifications.
Language: English
Price: $1,184.04
Technical regulations of Customs Union. On the safety of a personal protective equipment
Language: English
Price: $1,703.16
Technical regulations of Customs Union. On the safety of agricultural and forestry tractors and trailers
Language: English
Price: $98.40
Rostehnadzor (RTN) Order N 116 of 25.03.2014 "On approval of the Federal rules and regulations in the field of industrial safety". Rules of industrial safety of hazardous production facilities that use equipment operating under excess pressure. Reg. № 323
Language: English
Price: $972.28
Non-destructive testing. Capillary methods. General requirements
Language: English
Price: $121.77
Steel and alloys. Methods for detection and determination of grain size
Language: English
Price: $170.28
Classification of automobile roads. General parameters and requirements
Language: English
Price: $87.30
Raw material and food-stuff. Method for determination of arsenic
Language: English
Price: $113.49
Nickel, nickel and copper-nickel alloys treated by pressure. Grades
Language: English
Price: $179.45
Steel. Metallographic methods for the determination of non-metallic inclusions
Language: English
Price: $218.95
Stationary steam and hot-water boilers and heat recovery steam generators. Weld joints. Quality control. General requirements
Language: English
Price: $113.49
Jet fuels. Specifications
Language: English
Price: $86.13
Power cables with plastic insulation for rated voltages from 6 up to and including 35 kV. General specifications
Language: English
Price: $224.71
Low-voltage electrical installations. Part 5-52. Selection and erection of electrical equipment. Wiring systems
Language: English
Price: $422.53

YOUR ORDERING MADE EASY!

BelarusLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!