GOST R 54466-2011

ГОСТ Р 54466-2011

Rotating electrical machines. Asynchronous explosion-proof motors of power from 0,25 to 400 kW inclusive. General technical requirements and test methods

Машины электрические вращающиеся. Двигатели асинхронные взрывозащищенные мощностью от 0,25 до 400 кВт включительно. Общие технические требования и методы испытаний

Status: Effective - Introduced for the first time. IUS 6-2012

This standard applies to asynchronous explosion-proof motors with a capacity from 0.25 to 400 kW inclusive, intended for use in explosive atmospheres of gas, vapor or mist. The standard establishes general technical requirements for the design, testing, labeling and safety of asynchronous explosion-proof motors, directly related to the risk of ignition of the surrounding explosive atmosphere. The technical requirements established by this standard, types and methods of testing, as well as their list can be specified in engine specifications and (or) technical requirements agreed between the manufacturer and the consumer.

Настоящий стандарт распространяется на асинхронные взрывозащищенные двигатели мощностью от 0,25 до 400 кВт включительно, предназначенные для применения во взрывоопасных средах газа, пара или тумана. Стандарт устанавливает общие технические требования к конструированию, испытаниям, маркировке и безопасности асинхронных взрывозащищенных двигателей, непосредственно связанных с опасностью воспламенения окружающей взрывоопасной среды. Установленные настоящим стандартом технические требования, виды и методы испытаний, а также их перечень могут конкретизироваться в технических условиях на двигатели и (или) технических требованиях, согласованных между изготовителем и потребителем

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 16

Approved: Federal Agency for Technical Regulation and Metrology, 10/13/2011

SKU: RUSS64234

Price: $211.70




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 29 Electrical Engineering »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.15 Testing and control of products of electronic, optical and electrical industry » 4.15.1 Electric machines, electrical equipment and materials »

ISO classifier » 29 ELECTRICAL ENGINEERING » 29.160 Electric rotating machines » 29.160.30 Engines »

National standards » 29 ELECTRICAL ENGINEERING » 29.160 Electric rotating machines » 29.160.30 Engines »

ISO classifier » 29 ELECTRICAL ENGINEERING » 29.260 Electrical equipment for working in special conditions » 29.260.20 Electrical equipment for an explosive atmosphere »

National standards » 29 ELECTRICAL ENGINEERING » 29.260 Electrical equipment for working in special conditions » 29.260.20 Electrical equipment for an explosive atmosphere »

National Standards for KGS (State Standards Classification) » Latest edition » E Power and electrical equipment » E6 Electric machines, transformers and converters » E61 Electric motors »


The Document References:

GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles

GOST 11828-86: Rotating electrical machines. General test methods

GOST 11929-87: Rotating electrical machinery. General test methods. Noise levels determinations

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.010-76: Explosion safety. General requirements

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements

GOST 12.2.007.1-75: Occupation safety standards system. Rotating electric machines. Safety requirements

GOST 12.2.020-76: Explosion proof electrical apparatus. Terms and definitions. Classification. Marking

GOST 12080-66: Cylindrical ends of the shafts

GOST 12081-72: 1:10 Conical shaft ends. Basis dimensions. Permissible torque

GOST 12126-86: Small power electric machines. Mounting dimensions

GOST 12139-84: Electric rotary machines. Ranges of rated output, voltages and frequencies

GOST 14192-96: Cargo marking

GOST 14254-96: Degrees of protection provided by enclosures (IP Code)

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 15543.1-89: Electrical articles. General requirements for environmental climatic aspects stability

GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions

GOST 16962.1-89: Electrical articles. Test methods as to environments climatic factors resistance

GOST 16962.2-90: Electrotechnical product

GOST 17494-87: Rotating electrical machines. Classification of degrees of protection provided by enclosures for rotating machines

GOST 17516.1-90: Electrical articles. General requirement for environment mechanical stability

GOST 18620-86: Electrotechnical articles

GOST 18709-73: Rotating electrical machines of middle size. Mounting dimensions.

GOST 20.39.312-85: Integrated system of general technical requirements. Electrotechnical equipments and components. Dependability requirements

GOST 20.57.406-81: Electrical equipment, devices for electronic technology and quantum electronics

GOST 20459-87: Rotating electrical machines. Means of cooling. Symbols.

GOST 21130-75: Electrical articles. Grounding terminals and grounding signs

GOST 22782.0-81: Explosion-proof electrical equipment

GOST 22782.3-77: Explosion-proof electrical equipment with special means

GOST 22782.5-78: Explosion proof electrical apparatus with the type of protection «intrinsically-safe electrical circuit». Technical requirements and test methods

GOST 22782.6-81: Explosion proof electrical apparatus. Flameproof enclosure. Technical requirements and Test methods.

GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods

GOST 24754-81: General purpose mining electric equipment

GOST 2479-79: Rotating electrical machines. Symbols for types of construction and mounting arrangements.

GOST 25941-83: Rotating electrical machines. Methods for determining losses and efficiency

GOST 26772-85: Rotating electrical machines. Terminal markings and direction of rotation

GOST 27.301-95: Dependability in techniques. Dependability prediction. Basic principles

GOST 27.410-87: Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability

GOST 27888-88: Rotating electrical machines. Built-in thermal protection. Rules for protection

GOST 7217-87: Rotating electrical machines. Asynchronus motors. Test methods

GOST 8592-79: Rotating electrical machines. Mounting and connecting dimensions. Tolerances and control methods

GOST 8865-93: Electrical insulation system. Thermal evalution and classification

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST R 27.403-2009: Dependability in technics. Compliance tests plans for reliability

GOST R 51330.0-99: Explosionproof electrical apparatus. Part 0. General requirements

GOST R 51330.10-99: Electrical apparatus for explosive gas atmospheres. Part 11. Spark-free power line, type i

GOST R 51330.13-99: Explosion protected electrical apparatus. Part 14. Electrical installations in explosive gas environments (other than mines)

GOST R 51330.17-99: Explosion-protected electrical apparatus. Part 18. Type of protection (m)

GOST R 51330.1-99: Electrical apparatus for explosive gas atmospheres. Part 1. Construction and verification test of flameproof enclosures of electrical apparatus

GOST R 51330.20-99: Mining electrical equipment. Insulation, leakage paths and electrical gaps. Technical requirements and testing methods

GOST R 51330.8-99: Explosionproof electrical apparatus. Part 7. Type e protection.

GOST R 51401-99: Noise of machines. Determination of sound power levels of noise sources using sound pressure. Engineering method in an essentially free field over a reflecting plane

GOST R 52350.0-2005: Electrical apparatus for explosive gas atmospheres. Part 0. General requirements

GOST R 52350.11-2005: Electric equipment for explosive atmospheres. Part 11. Equipment protection by intrinsic safety «i»

GOST R 52350.1-2005: Electrical apparatus for explosive gas atmospheres. Part 1. Flameproof enclosures 'd'

GOST R 52350.14-2006: Electrical apparatus for explosive gas atmospheres. Part 14. Electrical installations in hazardous areas (other than mines)

GOST R 52776-2007: Rotating electrical machines. Rating and performance

GOST R 53148-2008: Rotating electrical machines. Noise limits

PB 05-618-03: Coal Mine Safety Regulations

Federal Law 184-FZ: About technical regulation

GOST R 51330.11-99: Explosion-proof electrical equipment. Part 12. Classification of mixtures of gases and vapors with air for safe experimental maximum gaps and minimum flammable currents

GOST R 51330.5-99: Explosion-proof electrical equipment. Part 4. Method for determining the self-ignition temperature

GOST R IEC 536-94: Classification of electrical and electronic equipment with regard to protection against electric shock

GOST R IEC 60034-14-2008: Electric rotating machines. Part 14. Mechanical vibration of certain types of machines with a rotation axis height of 56 mm or more. Measurements, assessment and limits of vibration

GOST R IEC 60050-426-2006: International electrotechnical vocabulary. Chapter 426. Electric equipment for explosive atmospheres

GOST R IEC 60079-0-2007: Explosive atmospheres. Part 0. Equipment. General requirements

GOST R IEC 60079-0-2011: Explosive atmospheres. Part 0. Equipment. General requirements

GOST R IEC 60079-11-2010: Explosive atmospheres. Part 11. Intrinsic safety circuit «i»

GOST R IEC 60079-1-2008: Explosive atmospheres. Part 1. Equipment protection by flameproof enclosures 'd'

GOST R IEC 60079-14-2008: Explosive atmospheres. Part 14. Electrical installations design, selection and erection

POT R M-016-2001: Inter-Industry Occupational Safety and Health Regulations (Safety Regulations) for Operation of Electrical Installations

The Document is Referenced By:

TU 3631-002-76457067-2012: Dynamic Pumps and Pump Units MST-TsN type and spare parts for them

Customers Who Viewed This Item Also Viewed:

Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Technical Regulations of the Eurasian Economic Union "On the Safety of Chemical Products"
Language: English
Price: $102.96
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.85
Technical Regulations of Customs Union, On safety of machines and equipment
Language: English
Price: $110.40
Determination of categories of rooms, buildings and external installations for explosion and fire hazards
Language: English
Price: $148.50
Basic and safety principles for man-machine interface, marking and identification. Identification of conductors by colours and alphanumerics.
Language: English
Price: $57.42
Railway rails. General specifications.
Language: English
Price: $1,184.04
Technical regulations of Customs Union. On the safety of a personal protective equipment
Language: English
Price: $1,703.16
Technical regulations of Customs Union. On the safety of agricultural and forestry tractors and trailers
Language: English
Price: $98.40
Rostehnadzor (RTN) Order N 116 of 25.03.2014 "On approval of the Federal rules and regulations in the field of industrial safety". Rules of industrial safety of hazardous production facilities that use equipment operating under excess pressure. Reg. № 323
Language: English
Price: $972.28
Non-destructive testing. Capillary methods. General requirements
Language: English
Price: $121.77
Steel and alloys. Methods for detection and determination of grain size
Language: English
Price: $170.28
Classification of automobile roads. General parameters and requirements
Language: English
Price: $87.30
Raw material and food-stuff. Method for determination of arsenic
Language: English
Price: $113.49
Nickel, nickel and copper-nickel alloys treated by pressure. Grades
Language: English
Price: $179.45
Steel. Metallographic methods for the determination of non-metallic inclusions
Language: English
Price: $218.95
Jet fuels. Specifications
Language: English
Price: $86.13
Power cables with plastic insulation for rated voltages from 6 up to and including 35 kV. General specifications
Language: English
Price: $224.71
Low-voltage electrical installations. Part 5-52. Selection and erection of electrical equipment. Wiring systems
Language: English
Price: $422.53
Dry-type transformers. General specifications
Language: English
Price: $258.32

YOUR ORDERING MADE EASY!

BelarusLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!