GOST R 53471-2009

ГОСТ Р 53471-2009

Synchronous three-phase generators of power above 100 kW. General specifications

Генераторы трехфазные синхронные мощностью свыше 100 кВт. Общие технические условия

Status: Effective - Introduced for the first time

This standard applies to three-phase synchronous generators with a capacity of over 100 kW, designed for continuous nominal operation S1 according to GOST R 52776 as sources of electrical energy of alternating current, manufactured for the needs of the national economy. Generators intended for export must comply with the requirements of GOST 28173. The standard does not apply to turbine generators, hydrogenerators and generators intended for use in onboard systems of mobile means of land, water and air transport

Настоящий стандарт распространяется на генераторы трехфазные синхронные мощностью свыше 100 кВт, предназначенные для продолжительного номинального режима работы S1 по ГОСТ Р 52776 в качестве источников электрической энергии переменного тока, изготовляемые для нужд народного хозяйства. Генераторы, предназначенные для экспорта, должны соответствовать требованиям ГОСТ 28173. Стандарт не распространяется на турбогенераторы, гидрогенераторы и генераторы, предназначенные для применения в бортовых системах подвижных средств наземного, водного и воздушного транспорта

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 16

Approved: Federal Agency for Technical Regulation and Metrology, 12/9/2009

SKU: RUSS64161

Price: $211.70




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 29 Electrical Engineering »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.15 Testing and control of products of electronic, optical and electrical industry » 4.15.1 Electric machines, electrical equipment and materials »

ISO classifier » 29 ELECTRICAL ENGINEERING » 29.160 Electric rotating machines » 29.160.20 Generators »

National standards » 29 ELECTRICAL ENGINEERING » 29.160 Electric rotating machines » 29.160.20 Generators »

National Standards for KGS (State Standards Classification) » Latest edition » E Power and electrical equipment » E6 Electric machines, transformers and converters » E62 Generators »


The Document References:

GOST 10169-77: 3-phase synchronous machines. Test methods

GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications

GOST 10511-83: Automatic rotational frequency control systems (ARFCS) of marine, locomotive

GOST 11828-86: Rotating electrical machines. General test methods

GOST 11929-87: Rotating electrical machinery. General test methods. Noise levels determinations

GOST 12.1.003-83: Noise. General safety requirements

GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements

GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements

GOST 12.2.007.11-75: Occupation safety standards system. Semiconductor converters of electric energy. Safety requirements

GOST 12.2.007.1-75: Occupation safety standards system. Rotating electric machines. Safety requirements

GOST 12139-84: Electric rotary machines. Ranges of rated output, voltages and frequencies

GOST 13267-73: Rotating electrical machines and directly connected them nonelectrical ones. Shaft heights and control methods

GOST 14192-96: Cargo marking

GOST 14254-96: Degrees of protection provided by enclosures (IP Code)

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 15151-69: Machines, instuments and other industrial products for tropics. General specifications.

GOST 15543.1-89: Electrical articles. General requirements for environmental climatic aspects stability

GOST 16372-93: Rotating electric machines. Limiting values of noise levels

GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions

GOST 16962.1-89: Electrical articles. Test methods as to environments climatic factors resistance

GOST 17412-72: Electrical articles for the cold climate regions. Technical requirements, acceptance and test methods

GOST 17494-87: Rotating electrical machines. Classification of degrees of protection provided by enclosures for rotating machines

GOST 17516.1-90: Electrical articles. General requirement for environment mechanical stability

GOST 17516-72: Electrical articles. Operating conditions as to environment mechanical aspects influence

GOST 18311-80: Electrical products. Terms and definitions of basic concepts

GOST 183-74: Rotating electrical machines

GOST 18709-73: Rotating electrical machines of middle size. Mounting dimensions.

GOST 2.601-2006: Unified system for design documentation. Exploitative documents

GOST 20459-87: Rotating electrical machines. Means of cooling. Symbols.

GOST 20815-93: Rotating electrical machines. Mechanical vibration of certain machines with shaft heights 56 mm and higher. Measurement, evaluation and limits of the vibration severity

GOST 20839-75: Rotating electrical machinery with shaft height from 450 to 1000 mm. Mounting dimensions

GOST 21130-75: Electrical articles. Grounding terminals and grounding signs

GOST 23875-88: Quality of electric energy. Terms and definitions

GOST 2479-79: Rotating electrical machines. Symbols for types of construction and mounting arrangements.

GOST 25941-83: Rotating electrical machines. Methods for determining losses and efficiency

GOST 27471-87: Electrical rotating machinery. Terms and definitions

GOST 28173-89: Rotating electrical machines. Rating and performance

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 8032-84: Preferred numbers and series of preferred numbers

GOST 8592-79: Rotating electrical machines. Mounting and connecting dimensions. Tolerances and control methods

GOST 8865-93: Electrical insulation system. Thermal evalution and classification

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements

GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.

GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions

GOST R 51318.11-2006: Electromagnetic compatibility of technical equipment. Industrial, scientific, medical and domestic (ISMD) high-frequency equipment. Radio disturbance. Limits and methods of measurement

GOST R 51318.11-99: Electromagnetic compatibility of technical equipment. Radio disturbance from industrial, scientific, medical and domestic (ISMD) radio-frequency equipment. Limits and test methods

GOST R 51320-99: Electromagnetic compatibility of technical equipment. Man-made radio disturbance. Test methods for technical equipment which are man-made radio disturbance sources

GOST R 51321.1-2007: Low-voltage switchgear and control gear assemblies. Part 1. Type-tested and partially type-tested assemblies. General technical requirements and test methods

GOST R 51908-2002: General requirements for machines, instruments and other industrial products as to storage and transporting conditions

GOST R 52776-2007: Rotating electrical machines. Rating and performance

GOST R 53148-2008: Rotating electrical machines. Noise limits

Federal Law 184-FZ: About technical regulation

GOST R IEC 60034-14-2008: Electric rotating machines. Part 14. Mechanical vibration of certain types of machines with a rotation axis height of 56 mm or more. Measurements, assessment and limits of vibration

GOST R IEC 60034-5-2007: Rotating electrical machines. Part 5. Classification of protection degrees provided by the integral design of rotating electrical machines (IP code)

Customers Who Viewed This Item Also Viewed:

Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Technical Regulations of the Eurasian Economic Union "On the Safety of Chemical Products"
Language: English
Price: $102.96
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.85
Technical Regulations of Customs Union, On safety of machines and equipment
Language: English
Price: $110.40
Determination of categories of rooms, buildings and external installations for explosion and fire hazards
Language: English
Price: $148.50
Basic and safety principles for man-machine interface, marking and identification. Identification of conductors by colours and alphanumerics.
Language: English
Price: $57.42
Railway rails. General specifications.
Language: English
Price: $1,184.04
Technical regulations of Customs Union. On the safety of a personal protective equipment
Language: English
Price: $1,703.16
Technical regulations of Customs Union. On the safety of agricultural and forestry tractors and trailers
Language: English
Price: $98.40
Rostehnadzor (RTN) Order N 116 of 25.03.2014 "On approval of the Federal rules and regulations in the field of industrial safety". Rules of industrial safety of hazardous production facilities that use equipment operating under excess pressure. Reg. № 323
Language: English
Price: $972.28
Non-destructive testing. Capillary methods. General requirements
Language: English
Price: $121.77
Steel and alloys. Methods for detection and determination of grain size
Language: English
Price: $170.28
Classification of automobile roads. General parameters and requirements
Language: English
Price: $87.30
Raw material and food-stuff. Method for determination of arsenic
Language: English
Price: $113.49
Nickel, nickel and copper-nickel alloys treated by pressure. Grades
Language: English
Price: $179.45
Steel. Metallographic methods for the determination of non-metallic inclusions
Language: English
Price: $218.95
Stationary steam and hot-water boilers and heat recovery steam generators. Weld joints. Quality control. General requirements
Language: English
Price: $113.49
Jet fuels. Specifications
Language: English
Price: $86.13
Power cables with plastic insulation for rated voltages from 6 up to and including 35 kV. General specifications
Language: English
Price: $224.71
Low-voltage electrical installations. Part 5-52. Selection and erection of electrical equipment. Wiring systems
Language: English
Price: $422.53

YOUR ORDERING MADE EASY!

BelarusLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!