STB IEC 60065-2004

СТБ МЭК 60065-2004

Audio, video and similar electronic equipment. Safety requirements

Аудио-, видео- и аналогичная электронная аппаратура. Требования безопасности

Status: Not effective - Canceled. IU TNPA No. 12-2013

The standard applies to electronic equipment designed to be powered from the network or from the power source of the equipment, from batteries or from a remote power source to receive, generate, record or play the corresponding audio, video and other similar signals. The standard also applies to equipment designed for use only in conjunction with the equipment listed above. The standard establishes only the safety requirements of the above equipment and does not establish other properties, such as type or characteristics

Стандарт распространяется на электронную аппаратуру, спроектированную для питания от сети или от источника питания аппаратуры, от батарей или от дистанционного источника питания для приема, генерации, записи или воспроизведения соответствующих аудио-, видео- и других подобных сигналов. Стандарт также распространяется на аппаратуру, спроектированную для применения только совместно с перечисленной выше аппаратурой.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 155

Approved: State Standard of the Republic of Belarus, 1/30/2004

SKU: BELA371938



National keywords: аппарат; аппарат передвижной; аппаратура; блокировка защитная; всеполюсный сетевой переключатель; выключатель сетевой всеполюсный; двойная изоляция; дистанционное управление; дополнительная изоляция; зазор; защитное разделение; защитное экранирование; защитный замок; значение пиковое; значение среднеквадратическое; изолирующий трансформатор; изоляция двойная; изоляция дополнительная; изоляция основная; изоляция усиленная; испытание контрольное; испытание типовое; источник воспламенения потенциальный; источник питания; канал утечки; класс i; класс ii; клемма защитного заземления; кожух противопожарной защиты; кожух противопожарный; контрольный тест; лазер; лазерная система; мобильное устройство; мощность выходная неискаженная; напряжение без пульсации; напряжение без пульсаций; напряжение питания номинальное; напряжение рабочее; неискаженная выходная мощность; номинальное напряжение питания; номинальное потребление тока; оборудование; основная изоляция; печатная плата; пиковое значение; плата печатная; подключение к сети; подключенная постоянно; полное номинальное сопротивление нагрузки; постоянно подключенное; потенциальный источник возгорания; путь утечки; рабочее напряжение; разделение защитное; разрядник; разъем; режим дежурный; режим ожидания; рисунок токопроводящий; розовый шум; сеть; сеть телекоммуникационная; сигнал шума; система лазерная; соединение с сетью; соединитель; соединитель (клемма); сопротивление нагрузки полное номинальное; среднеквадратичное значение телекоммуникационная сеть; схема проводимости; тепловой выключатель; термовыключатель; термопреобразователь; терморезистор ptc; терморезистор ртс; типовое испытание; ток от прикосновения; ток потребления номинальный; трансформатор изолирующий; трансформатор разделительный; управление дистанционное; усиленная изоляция; усилитель звуковой частоты; устройство размыкающее тепловое; устройство теплового отключения; утечка; шум розовый; экранирование защитное;

Price: request_a_quote

The Product is Contained in the Following Classifiers:

Evidence base (TR CU, Technical Regulation of the Customs Union) » 004/2011 TR CU. About safety of low voltage equipment » Regulations and standards (to TR CU 004/2011) »


The Document References:

GOST 11478-88: Electronic consumer equipment. Norms and methods of climatic and environmental mechanical testing procedure

GOST 14254-96: Degrees of protection provided by enclosures (IP Code)

GOST 26246.12-89: Polyimide copper -clad film for flexible printed circuits for general purpose

GOST 26246.13-89: Polyimide copper -clad film of rated flammability for flexible printed circuit boards

GOST 26246.14-91: Prepreg for use as bonding sheet material in the fabrication of multilayer printed boards

GOST 26246.1-89: Phenol-impregnated cellulose paper foil-clad electrical insulating material for printed circuit boards, high electrical quality specifications

GOST 26246.2-89: Phenolic-impregnated cellulose paper copper -clad electrical insulating material for printed circuit boards, economy grade specifications

GOST 26246.3-89: Epoxy-impregnated cellulose paper copper -clad electrical insulating material of rated flammability for printed circuits specifications

GOST 26246.6-89: Phenol-impregnated cellulose paper foil-clad electrical insulating material of rated combustibility for plated circuits.

GOST 26246.7-89: Phenolic-impregnated cellulose paper copper -clad electrical insulating material of rated flammability for printed circuits (vertical flame test method) specifications

GOST 26246.8-89: Foil-clad polyester film for flexible printed-circuit boards

GOST 26246.9-89: Epoxy-impregnated woven (non-woven) glass fabric foil-clad electrical insulating material of rated combustibility for printed circuit boards

GOST 26413.0-85: Power cords

GOST 27473-87: Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions

GOST 27484-87: Fire hazard testing. Test methods. Needle-flame test

GOST 28018-89: Adhesive tape for electrical insulation

GOST 28019-89: Adhesive tape for electrical insulation. Test methods

GOST 28020-89: Adhesive electric insulation tapes

GOST 28021-89: Adhesive electric insulation tapes

GOST 28022-89: Adhesive electric insulation tapes

GOST 28023-89: Adhesive electric insulation tapes

GOST 28024-89: Adhesive electric insulation tapes

GOST 28025-89: Adhesive electric insulation tapes

GOST 28026-89: Adhesive electric insulation tapes

GOST 28027-89: Adhesive electric insulation tapes

GOST 28203-89: Basic environmental testing procedures. Part 2. Tests. Test Fc and guidance: Vibration ( sinusoidal )

GOST 28218-89: Basic environmental testing procedures. Part 2. Tests. Test Ed: Free fall

GOST 28312-89: Radioelectronic equipment, professional. Conventional graphic designations

GOST 28752-90: Connectors for frequencies below 3 MHz. Part 9. Circular connectors for radio and associated sound equipment

GOST 28779-90: Solid electrical insulating materials. Methods of test for the determination of the flammability when exposed to an igniting source

GOST 28896-91: Fixed capacitors for use in electronic equipment. Part 1. General specifications

GOST 29322-92: Standard voltages

GOST 30851.1-2002: Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB'S). Part 1. General rules

GOST 30851.2.2-2002: Appliance couplers for household and similar general purposes. Part 2-2. Particular requirements for interconnection couplers for household and similar equipment. Requirements and methods of tests

GOST 8865-93: Electrical insulation system. Thermal evalution and classification

STB GOST R 51322.2.2-2003: Electric plug connectors for household and similar purpose. Part 2. Additional requirements to outlets for appliances and test methods

STB GOST R 51322.2.6-2003: Electric plug connectors for household and similar purpose. Part 2-6. Additional requirements to sockets with circuit-breaker with lockout devices for fixed installations and test methods

STB IEC 60730-1-2004: Automatic electric controls of household and similar purpose. Part 1. General requirements

STB IEC 60730-2-14-2006: Automatic electric controls of household and similar purpose. Part 2-14. Additional requirements to power electric drives

STB IEC 60730-2-5-2004: Automatic electric controls of household and similar purpose. Part 2-5. Additional requirements to automatic electric devices of burners control

GOST IEC 384-14-95: Fixed capacitors for use in electronic equipment. Part 14. Sectional specification. Fixed capacitors for electromagnetic interference suppression and connection to the supply mains

STB IEC 60730-2-18-2006: Automatic electric controls of household and similar purpose. Part 2-18. Additional requirements to automatic electric sensor devices of control of water flow and air flow including the requirements to mechanical characteristics

The Document is Referenced By:

STB IEC 60335-1-2013: Household and similar electrical devices. Safety. Part 1. General requirements

STB IEC 60745-1-2012: Electromechanic hand guided tool. Safety. Part 1. General requirements

STB IEC 61000-3-2-2006: Electromagnetic compatibility. Part 3-2. Standards. Norms of emission of harmonic current emissions for equipment with absorbed current

Customers Who Viewed This Item Also Viewed:

Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Technical Regulations of the Eurasian Economic Union "On the Safety of Chemical Products"
Language: English
Price: $102.96
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.85
Technical Regulations of Customs Union, On safety of machines and equipment
Language: English
Price: $110.40
Determination of categories of rooms, buildings and external installations for explosion and fire hazards
Language: English
Price: $148.50
Basic and safety principles for man-machine interface, marking and identification. Identification of conductors by colours and alphanumerics.
Language: English
Price: $57.42
Railway rails. General specifications.
Language: English
Price: $1,184.04
Technical regulations of Customs Union. On the safety of a personal protective equipment
Language: English
Price: $1,703.16
Technical regulations of Customs Union. On the safety of agricultural and forestry tractors and trailers
Language: English
Price: $98.40
Rostehnadzor (RTN) Order N 116 of 25.03.2014 "On approval of the Federal rules and regulations in the field of industrial safety". Rules of industrial safety of hazardous production facilities that use equipment operating under excess pressure. Reg. № 323
Language: English
Price: $972.28
Non-destructive testing. Capillary methods. General requirements
Language: English
Price: $121.77
Steel and alloys. Methods for detection and determination of grain size
Language: English
Price: $170.28
Classification of automobile roads. General parameters and requirements
Language: English
Price: $87.30
Raw material and food-stuff. Method for determination of arsenic
Language: English
Price: $113.49
Nickel, nickel and copper-nickel alloys treated by pressure. Grades
Language: English
Price: $179.45
Steel. Metallographic methods for the determination of non-metallic inclusions
Language: English
Price: $218.95
Jet fuels. Specifications
Language: English
Price: $86.13
Power cables with plastic insulation for rated voltages from 6 up to and including 35 kV. General specifications
Language: English
Price: $224.71
Low-voltage electrical installations. Part 5-52. Selection and erection of electrical equipment. Wiring systems
Language: English
Price: $422.53
Dry-type transformers. General specifications
Language: English
Price: $258.32

YOUR ORDERING MADE EASY!

BelarusLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!