STB IEC 61347-2-13-2009

СТБ IEC 61347-2-13-2009

Electronic control gears for lamps. Part 2-13. Additional requirements to electronic control gears with input voltage of direct or alternating current for modules with light-emitting diodes

Аппараты пускорегулирующие для ламп. Часть 2-13. Дополнительные требования к электронным пускорегулирующим аппаратам с напряжением питания постоянного или переменного тока для модулей со светоизлучающими диодами

Status: Not effective - Canceled. IU TNPA No. 12-2015

The standard establishes additional safety requirements for electronic control gears (ECG) with a supply voltage up to 250 V DC or up to 1000 V AC with a frequency of 50 or 60 Hz and with operating frequencies different from the frequency of the supply network for connecting modules with light emitting diodes (further - LED modules). The standard applies to electronic ballasts designed to power LED modules with stabilized voltage or current with protection against electric shock using a safe extra-low voltage (BSNN) system or a system equivalent to the BONN system, as well as to power LED modules with a higher voltage. The standard is also applicable to electronic ballasts with unstabilized output voltage or current.

Стандарт устанавливает дополнительные требования безопасности к электронным пускорегулирующим аппаратам (ЭПРА) с напряжением питания до 250 В постоянного тока или до 1000 В переменного тока с частотой 50 или 60 Гц и с рабочими частотами, отличающимися от частоты питающей сети, предназначенных для подключения модулей со светоизлучающими диодами (далее - модули СИД). Стандарт распространяется на ЭПРА, предназначенные для питания модулей СИД стабилизированным напряжением или током с защитой от поражения электрическим током с применением системы безопасного сверхнизкого напряжения (БСНН) или системы, эквивалентной системе БОНН, а также для питания модулей СИД более высоким напряжением. Стандарт также применим для ЭПРА с нестабилизированным выходным напряжением или током.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 40

Approved: State Standard of the Republic of Belarus, 12/29/2009

SKU: BELA29194

Price: request_a_quote

The Product is Contained in the Following Classifiers:

Evidence base (TR CU, Technical Regulation of the Customs Union) » 004/2011 TR CU. About safety of low voltage equipment » Regulations and standards (to TR CU 004/2011) »

The Document References:

GOST 10374-93: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 7. Special requirements for multi-function instruments

GOST 23706-93: Direct action analog electrical

GOST 28018-89: Adhesive tape for electrical insulation

GOST 28019-89: Adhesive tape for electrical insulation. Test methods

GOST 28020-89: Adhesive electric insulation tapes

GOST 28021-89: Adhesive electric insulation tapes

GOST 28022-89: Adhesive electric insulation tapes

GOST 28023-89: Adhesive electric insulation tapes

GOST 28024-89: Adhesive electric insulation tapes

GOST 28025-89: Adhesive electric insulation tapes

GOST 28027-89: Adhesive electric insulation tapes

GOST 28312-89: Radioelectronic equipment, professional. Conventional graphic designations

GOST 30012.1-2002: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 1. Definitions and general requirements common to all parts

GOST 7396.1-89: Plugs and socket-outlets for domestic and similar general use

GOST 7590-93: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 4. Special requirements for frequency meters

GOST 8039-93: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 5. Special requirements for phase meters, power factor meters and synchroscopes

GOST 8042-93: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 8. Special requirements for accessories

GOST 8476-93: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 3. Special requirements for wattmeters and varmeters

GOST 8711-93: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2. Special requirements for ammeters and voltmeters

GOST 8865-93: Electrical insulation system. Thermal evalution and classification

GOST IEC 384-14-95: Fixed capacitors for use in electronic equipment. Part 14. Sectional specification. Fixed capacitors for electromagnetic interference suppression and connection to the supply mains

STB IEC 60598-1-2008: Lamps. Part 1. General requirements and test methods

STB IEC 60598-2-6-2002: Lighting fixtures. Part 2. Particular requirements. Section 6. Lighting fixtures with built-in transformers or converters for filament lamps

The Document is Referenced By:

STB IEC 62031-2009: Modules with light-emitting diodes for general lighting. Safety requirements

Customers Who Viewed This Item Also Viewed:

Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Technical Regulations of the Eurasian Economic Union "On the Safety of Chemical Products"
Language: English
Price: $102.96
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.85
Technical Regulations of Customs Union, On safety of machines and equipment
Language: English
Price: $110.40
Determination of categories of rooms, buildings and external installations for explosion and fire hazards
Language: English
Price: $148.50
Basic and safety principles for man-machine interface, marking and identification. Identification of conductors by colours and alphanumerics.
Language: English
Price: $57.42
Railway rails. General specifications.
Language: English
Price: $1,184.04
Technical regulations of Customs Union. On the safety of a personal protective equipment
Language: English
Price: $1,703.16
Technical regulations of Customs Union. On the safety of agricultural and forestry tractors and trailers
Language: English
Price: $98.40
Rostehnadzor (RTN) Order N 116 of 25.03.2014 "On approval of the Federal rules and regulations in the field of industrial safety". Rules of industrial safety of hazardous production facilities that use equipment operating under excess pressure. Reg. № 323
Language: English
Price: $972.28
Non-destructive testing. Capillary methods. General requirements
Language: English
Price: $121.77
Steel and alloys. Methods for detection and determination of grain size
Language: English
Price: $170.28
Classification of automobile roads. General parameters and requirements
Language: English
Price: $87.30
Raw material and food-stuff. Method for determination of arsenic
Language: English
Price: $113.49
Nickel, nickel and copper-nickel alloys treated by pressure. Grades
Language: English
Price: $179.45
Steel. Metallographic methods for the determination of non-metallic inclusions
Language: English
Price: $218.95
Jet fuels. Specifications
Language: English
Price: $86.13
Power cables with plastic insulation for rated voltages from 6 up to and including 35 kV. General specifications
Language: English
Price: $224.71
Low-voltage electrical installations. Part 5-52. Selection and erection of electrical equipment. Wiring systems
Language: English
Price: $422.53
Dry-type transformers. General specifications
Language: English
Price: $258.32

YOUR ORDERING MADE EASY! is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!