STB EN 710-2004

СТБ ЕН 710-2004

Safety requirements to foundry machines and installations for making molds and related cores

Требования безопасности к литейным машинам и установкам для изготовления форм и стержней и относящимся к ним устройствам

Status: Applied in the EAEU

The standard establishes safety requirements that must be observed in the design, manufacture and operation of machines and installations used in the foundry industry for the manufacture of castings in one-off forms. The standard applies to equipment: machines and installations for cooking and

Стандарт устанавливает требования безопасности, которые необходимо соблюдать при проектировании, изготовлении и эксплуатации машин и установок, применяемых в литейном производстве для изготовления отливок в разовые формы. Стандарт распространяется на оборудование: машины и установки для приготовления и/или регенерации формовочной смеси; стержневые машины и установки; выбивные устройства; другие дополнительные устройства. Стандарт распространяется на оборудование, которое поступает на рынок после опубликования данного стандарта. Стандарт не содержит требований безопасности при изготовлении восковых моделей и моделей цельных форм, а также оборудования по утилизации отходов воска и сушильных печей. Стандарт не распространяется на крановые установки, установки дутья, транспортеры непрерывного действия или управляемые устройства, которые могут быть составной частью указанного выше оборудования. Стандарт не распространяется на оборудование для снижения уровня пыли.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 82

Approved: State Standard of the Republic of Belarus, 6/28/2004

SKU: BELA28754

Price: request_a_quote

The Product is Contained in the Following Classifiers:

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

The Document References:

GOST EN 1088-2002: Safety of machines. Locking devices connected with protective devices. Principles of designing and selection

GOST EN 349-2002: Safety of machines. Minimal distances for the prevention of jamming of human body members.

GOST EN 418-2002: Safety of machines. Installation of emergency shut-down. Functions Design Philosophy

GOST ISO/TO 12100-1-2001: Safety of machinery. Basic concepts, general principles for design. Part 1. Basic terms, procedure

GOST ISO/TO 12100-2-2002: Safety of machinery. Basic concepts, general principles for design. Part 2. Technical principles and technical requirements

Customers Who Viewed This Item Also Viewed:

Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Steering gears. Industrial purity requirements.
Language: English
Price: $1,375.40
Pipeline valves. Leakage rates of valves.
Language: English
Price: $198.99
Pipeline valves. Swing and lift check valves. General specifications
Language: English
Price: $202.95
Pipelines valves. Jackets of oval, octagonal section, lens steel for valves flanges. Design, dimension and general technical requirements
Language: English
Price: $57.42
Heat-resistant spiral-wound gaskets. Types. Main dimensions
Language: English
Price: $79.20
Slinging arrangements for vessels and apparatus. Specifications
Language: English
Price: $217.80
Electrical apparatus for explosive gas atmospheres. Part 20. Data for flammable gases and vapours, relating to the use of electrical apparatus
Language: English
Price: $180.08
Rolling bearings. Static load rating
Language: English
Price: $237.60
Medical instruments, apparatus and equipment. General specifications
Language: English
Price: $286.95
Electromagnetic compatibility of technical equipment. Immunity tests. General introduction
Language: English
Price: $435.60
Insulated bushings for alternating current rated voltages above 1000 V. Common specifications
Language: English
Price: $319.08
High-pressure welded steel vessels. General technical requirements
Language: English
Price: $763.29
Rolling bearings. Dynamic load ratings and rating life
Language: English
Price: $358.48
Safety manual “recommendations for the design and safe operation of the process pipelines”
Language: English
Price: $644.67
Technical regulations of Customs Union. On the safety of agricultural and forestry tractors and trailers
Language: English
Price: $98.40
Petroleum and natural gas industries. Shell-and-tube heat eхchangers. Technical requirements
Language: English
Price: $175.23
Mineral fertilizers. Method for determination of granules static strength
Language: English
Price: $69.84
Sulphur for industrial use. Sampling and preparation of samples
Language: English
Price: $44.55

YOUR ORDERING MADE EASY! is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!