|
GOST 15151-69
ГОСТ 15151-69
|
|
Machines, instuments and other industrial products for tropics. General specifications.
Машины, приборы и другие технические изделия для районов с тропическим климатом. Общие технические условия
Status: Valid - Supersedes
The standard applies to all types of machines, instruments and other technical products intended for use only in areas with a tropical climate.
Стандарт распространяется на все виды машин, приборов и других технических изделий, предназначенных для эксплуатации только в районах с тропическим климатом.
Choose Language:
Format: Electronic (pdf/doc)
Page Count: 36
Approved: Committee of Standards, Measures and Measuring Instruments under the Council of Ministers of the USSR,
12/29/1969
SKU: RUSS21176
|
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
21 Mechanical systems and general purpose devices »
Standards for pipe fittings (TPA) »
8. Piping valves (TPA) design »
8.1 General design issues piping valves (TPA) »
Standards for pipe fittings (TPA) »
11. Piping valves (TPA) tests »
11.4 Special test procedures »
11.4.2 Climatic testing »
Standards for pipe fittings (TPA) »
1. Fundamental standards for injection molding machines »
ISO classifier »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.020 Characterization and design of mechanisms, instruments and equipment »
National standards »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.020 Characterization and design of mechanisms, instruments and equipment »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G0 General rules and regulations for engineering »
G08 Application and operation »
The Document References:
GOST 102-75: Birch plywood for aircraft. Specifications
GOST 10776-78: Waterproofed and biocide impregnated linen and half-linen fabrics. Standard requirements for amount of fastened compounds and indices of aqueous extract
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15152-69: Unified system of corrosion and ageing protection. Industrial rubber products for tropics. General requirements
GOST 15155-99: Wood products for tropical regions. Protection means and protective parameters
GOST 15156-84: Lubricating oils, lubricants and special liquids for industrial use in tropical climate regions
GOST 15158-78: Paper and board with protective coating for packaging of goods and production of spare parts utilized in tropics. Specifications
GOST 15159-76: Technical felt and parts from it for technical products used in tropics. Specifications
GOST 15160-69: Technical cotton fabrics and products tropics. Specifications
GOST 17433-80: Industrial purity. Compressed air. Grades of contamination
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 17711-93: Cast copper-zink alloys (brass). Grades
GOST 19738-74: Silver solders. Marks
GOST 21930-76: Tin-lead solders in pigs. Specifications
GOST 21931-76: Tin-lead solders in the form of products. Specifications
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 3916.1-96: Plywood with external layers of deciduous veneer for general use
GOST 3916.2-96: General purpose plywood with coniferous veneer
GOST 4233-77: Reagents. Sodium chloride. Specifications
GOST 4515-93: Copper phosphorous alloys. Specifications
GOST 6613-86: Square meshed woven wire gauzes
GOST 6709-72: Distilled water. Specifications
GOST 860-75: Tin. Specifications
GOST 9.005-72: Unified system of corrosion and ageing protection. Metals, alloys, metallic and non-metallic coatings. Permissible and impermissible contacts with metals and non-metals
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.048-89: Unified system of corrosion and ageing protection. Technical items. Methods of laboratory tests for mould resistance
GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
The Document is Referenced By:
GOST 10287-83: Dc electric meters
GOST 10393-74: Piston compressors for railway stock
GOST 10512-78: Magnetic and electromagnetic separators. Specification
GOST 10512-93: Magnetic and electromagnetic separators
GOST 10693-81: Hermetic capacitor bushings designed for rated voltages 110 kv and more
GOST 10718-81: Hydrocyclones. Specification
GOST 11004-84: Principal ventilation mine blowers
GOST 11031-76: Metal travellers for rings of spinning and ring-doubling frams. Specifications
GOST 11102-75: Acceptance and acting instruments and devices for diesel automation. Types, basic parameters and technical requirements
GOST 11379-80: Dynamic Pumps for waste liquids. General specifications
GOST 11539-2014: Bakelized plywood. Specifications
GOST 11539-83: Bakelite resin plywood
GOST 11700-80: Two-line lubricating stations. Specifications
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.4.035-78: Protective face shields
GOST 12.4.070-79: Occupational safety standards system. Signals of pre-explosive concentrations, thermochemical. General specifications
GOST 12027-93: Heat exchangers with laminar devices
GOST 12495-77: Refrigerators, grate. Specification
GOST 12997-84: SSI Products. General specifications
GOST 13384-93: Measuring transducers for thermoelectric transducers and resistance thermo-transducers. General technical requirements and methods of tests
GOST 13861-89: Pressure regulators for the flame machining
GOST 13981-87: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications
GOST 14010-74: Pickup-pressure and differential switches ssi
GOST 14651-78: Electrode holders for manual arc welding
GOST 14694-76: Metal-clad switchgears up to 10 kV. Test methods
GOST 14794-79: Concrete current-limiting
GOST 14933-83: Air-suction units for household vacuum cleaners
GOST 14965-80: Three-phase synchronous generators of power over 100 kw
GOST 15035-80: Underground scraper winches
GOST 15152-69: Unified system of corrosion and ageing protection. Industrial rubber products for tropics. General requirements
GOST 15156-84: Lubricating oils, lubricants and special liquids for industrial use in tropical climate regions
GOST 15158-78: Paper and board with protective coating for packaging of goods and production of spare parts utilized in tropics. Specifications
GOST 15160-69: Technical cotton fabrics and products tropics. Specifications
GOST 1578-76: Speedometers with flexible shaft drive for cars and cycles. General technical specifications
GOST 15829-89: Booster fuel piston type pumps for diesel engines
GOST 15850-84: Mine parachutes for cages
GOST 15851-84: Suspension devices for mine cages
GOST 15963-79: Electrical articles for tropical application. General technical requirements and methods of testing
GOST 16162-78: Reducers of general usage. General specifications
GOST 16215-80: Fork-lift trucks for general purposes
GOST 16264.0-85: Low-power electric motors
GOST 16286-84: Potentiometric transducers SSI. Industrial auxiliary electrodes. Specifications
GOST 16287-77: Glass industrial electrodes for determination hydrogan ion activation SSI. Specifications
GOST 16349-85: Cyclic mixers for building materials
GOST 16809-78: Start-control devices for gas-discharge lamps. General specifications
GOST 16940-89: Sanitary stretchers. General technical requirements and test methods
GOST 17429-80: Magnetic catchers. Specification
GOST 17437-81: Air filters - moisture separators
GOST 17515-72: Hookup plastic insulated wires
GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications
GOST 18324-73: Ionizing radiation source units for radioisotope instruments of relay type
GOST 18468-79: Pneumatic reduction valves for Pnom = 1 MPa (approximately equal to 10 kgf / cm2). Specification
GOST 18910-96: Hydraulic instruments and devices. General specifications
GOST 19716-81: Automatic pneumatic rapier looms
GOST 19930-91: Sewing domestic machines. General specifications
GOST 2.116-84: Product technical level and quality map
GOST 20245-74: Hydraulic apparatuses
GOST 20245-95: Volumetric hydraulic actuators. Hydraulic apparatus. Rules of acceptance and test methods.
GOST 20790-82: Medical instruments, apparatus and equipment. General specifications
GOST 20790-93: Medical instruments, apparatus and equipment. General specifications
GOST 20791-83: Centrifugal glandless electric pumps. Technical requirements
GOST 20817-75: Lube chokes. Specification
GOST 2103-89: General purpose mobile belt conveyors
GOST 21253-75: Automatic filling and metering-and-filling machines
GOST 21339-75: Tachometers. General technical requirements
GOST 21339-82: Tachometers
GOST 21993-76: Safety lubricating valves. Specification
GOST 22018-84: Amperometric analysers for dissolved oxygen SSI. General technical requirements
GOST 22045-89: Overhead travelling single-beam cranes. Specifications
GOST 22502-89: Condensing units with hermetic refrigeration compressors for commercial refrigeration machinery
GOST 22520-85: Pressure, pressure difference and vacuum transmitters with electrical analog output signals gsp
GOST 22584-88: Rope electric hoists. Specifications
GOST 22729-84: SSI fluid analyzers general technical specifications
GOST 22917-78: Cable couplings for arc welding. Specifications
GOST 22976-78: Hydraulic drives, pneumatic actuators and lubrication systems
GOST 23067-78: Electric heating equipment for public catering establishments. General specifications
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 23200-78: Pleasure row boats and motor boats. General requirements when delivering for export
GOST 23265-78: Spectacle lenses. Specifications
GOST 23764-79: Gamma-defectoscopes. General technical specifications
GOST 24040-80: Electrical equipment of ships. Rules and standards of designing and electric mounting
GOST 24366-80: General purpose auto- and electric fork lift trucks. Load gripping devices
GOST 24679-81: Hydraulic four-way control valves for nominal pressure to 32 MPa. Specifications
GOST 24979-81: Constant speed electrical actuators for remote control. Types and basic parameters. Technical requirements
GOST 25144-82: Air silencers. Specifications
GOST 25367-82: Electrically driven ship topping winch. Main data, specifications and acceptance rules
GOST 25476-82: Hydraulic fluid power and lubricating systems. Filters. Acceptance and Test methods
GOST 25531-82: Lubricators. Specifications
GOST 25862-83: Constant speed electrical actuators for remote control. Acceptance rules and methods of tests
GOST 26032-83: System of standardized type structures of SSI aggregated complexes. General specifications
GOST 26116-84: Well-logging apparatus.
GOST 26140-84: Medical x-ray units
GOST 26304-84: Industrial pipeline valves supplied
GOST 26582-85: Food (manufacturing) industry machines and equipment
GOST 26653-2015: Preparation of general cargoes for transportation. General requirements
GOST 26653-85: Preparation of general cargo for transportation by sea. General requirements
GOST 26653-90: Preparation of general cargoes for transportation. General requirements
GOST 26698.1-93: Rigs for blast-holes drilling in open-cast mining works
GOST 26698.2-93: Underground drill rigs
GOST 26963-86: Self-contained room air conditioners. General specifications
GOST 27962-88: Industrial equipment
GOST 27987-88: Potentiometric analyzer of liquid, SSI. General specifications
GOST 28297-89: Opening and cleaning machines for cotton
GOST 28408-89: Manual hoists and trolleys. General specifications
GOST 28427-90: Electric lamps and starters. General requirements for export
GOST 28723-90: Velocity, electromagnetic and vortex flow meters
GOST 28724-90: Speed gas meters
GOST 28725-90: Instruments for measuring the level of liquids and loose materials
GOST 28840-90: Machines for tension, compression and bending tests of materials
GOST 28904-91: Control systems of an electric filter
GOST 29024-91: Turbidimetric and nephelometric liquid analyzers
GOST 29226-91: Viscometers for liquids
GOST 30124-94: Weight meters and weighing batchers of continuous action
GOST 30531-97: Porcelain and glass pin type insulators for voltage level up to 1000 V. General specifications
GOST 31562-2012: Рneumatic rock drills. General technical requirements
GOST 31563-2012: Pneumatic hammer drills. Technical requirements and testing methods
GOST 31564-2012: Pneumatic stopper drills. General technical requirements
GOST 31819.11-2012: Electricity metering equipment (а.с). Particular requirements. Part 11. Electromechanical meters for active energy (classes 0,5; 1 and 2)
GOST 31830-2012: Electrostatic precipitators. Safety requirement and methods of testing
GOST 32397-2013: Distribution boards for industrial and social buildings. General specifications
GOST 33144-2014: Public roads. Road mirrors. Technical specifications
GOST 33145-2014: Public roads. Road mirrors. Methods of control
GOST 34388-2018: Steel pipes. Method of tests of corrosion resistance under the influence of salt spray
GOST 3564-84: Multioutlet oil-lubricating plants. Specifications
GOST 3940-2004: Automotive engineering electrical equipment. General specifications.
GOST 3940-84: Electrical equipment for vehicles and tractors. General technical requirements
GOST 3941-73: Magneto, auto-tractor, for internal combustion engines. General specifications
GOST 4.79-87: Product-quality index system. Friction products for brake assemblies. Nomenclature of indices
GOST 4871-77: Rheostats for starting and control for DC motors. General specifications
GOST 5.158-69: Single-bucket trench Excavators types ECG-4u and ECG-8I. Quality requirements for certified products
GOST 5464-75: Pontoons of pressure floating mud pipelines and pipelines. General specifications
GOST 5466-74: Soil transfering pipes
GOST 5503-87: Bicycles
GOST 6113-84: Horizontal expellers for pottery ware
GOST 6490-93: Suspended line disk insulators
GOST 6570-75: Electrical induction active and reactive energy meters. General technical specifications
GOST 6570-96: Electrical induction active and reactive energy meters
GOST 6625-75: Mine local ventilating fans
GOST 6625-85: Mine local ventilating fans
GOST 689-90: Disconnectors and ground-wires for alternating current with voltage over 1 000 v
GOST 6918-81: Line screen grease strainers. Specifications
GOST 6937-81: Conic crushers. Specification
GOST 7075-80: Manual Traveling Underrunning Cranes Specifications
GOST 7371-89: Bicycles for children
GOST 7402-84: Electric fans for domestic use
GOST 7600-90: Press-forging plant
GOST 7890-84: Travelling single-girder suspended cranes. Specifications
GOST 7890-93: Travelling single girder suspended cranes. Specifications
GOST 8042-93: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 8. Special requirements for accessories
GOST 8054-81: Metal propellers. General specifications
GOST 8220-85: Underground fire hydrants. Specifications
GOST 8306-86: Electric hand planers. Specification
GOST 8608-96: Porcelain pin support insulators for voltage above 1000 V. General specifications
GOST 8778-81: Blanks for spectacle lenses. Technical conditions
GOST 9.012-73: Unified corrosion and ageing protection system. Metal and non-metal inorganic coating. Methods of accelerated tests for atmospheric corrosion
GOST 9.040-74: Unified system of corrosion and ageing protection. Calculated and experimental method for accelerated test of corrosion losses in atmospheric conditions
GOST 9.054-75: Unified system of corrosion and ageing protection. Anticorrosive oils, greases and inhibited film-forming petroleum compounds. Accelerated test methods of protective property
GOST 9.703-79: Unified system of corrosion and ageing protection. Plastic materials for items, used in tropical conditions. General requirements for selection and test methods
GOST 9018-89: Fuel dispensing pumps. General specifications
GOST 9193-77: Warping machines Technical conditions
GOST 9218-2015: Automotive vehicles for transportation of food liquids. Requirements and test methods
GOST 9218-86: Tanks for food liquids mounted on vehicles
GOST 9231-80: Twin-shaft blenders of paddle type
GOST 9357-95: Electric shavers
GOST 9500-84: Portable standard dynamometers
GOST 9630-80: Three-phase asynchronous motors. General specifications.
GOST 9684-75: Flow indicators. Specification
GOST 9736-91: Electric apparatus of direct transformation for measuring non -electric values. General technical requirements and test methods
GOST ED1 2103-81: Conveyor belts of general purpose. Technical conditions
GOST ED1 22827-86: General-purpose self-propelled boom cranes. Specifications. Export addition
GOST ED1 7164-78: Self-balancing servo instruments of SSI. General specifications. Export supplement
GOST R 12.4.013-97: Occupational safety standards system. Goggles. General specifications
GOST R 50059-92: Travelling single-girder suspended cranes. Specifications
GOST R 50444-92: Medical instruments, apparatus and equipment. General specifications
GOST R 50601-93: Impeller counters for potable water. General specifications
GOST R 50940-96: Electroshock batons. General specifications
GOST R 51136-98: Protective laminate glass. General specifications
GOST R 51246-99: Pneumatic hammer drills. Technical requirements and testing methods
GOST R 51628-2000: Distribution boards for dwelling-houses. General specifications
GOST R 51707-2001: Electrostatic precipitators. Safety requirement and methods of testing
GOST R 51778-2001: Distribution boards for industrial and social buildings. General specifications
GOST R 52218-2004: Shaft sinking winches. General technical requirements and test methods
GOST R 52230-2004: Electrical equipment for vehicles and tractors. General specifications
GOST R 52321-2005: Electricity metering equipment (а.с). Particular requirements. Part 11. Electromechanical meters for active energy (classes 0,5; 1 and 2)
GOST R 52442-2005: Pneumatic stopper drills. General technical requirements
GOST R 52443-2005: Pneumatic rock drills. General technical requirements
GOST R 52726-2007: Alternating current disconnectors and earthling switches for voltage above 1 kV and operating mechanisms for them. General specifications
GOST R 52766-2007: Automobile roads of general use. Road facilities. General requirements
GOST R 52767-2007: Automobile roads of the general use. Road facilities. Methods for determination of parameters
GOST R 52931-2008: Instruments for process monitoring and control. General specifications
GOST R 53471-2009: Synchronous three-phase generators of power above 100 kW. General specifications
GOST R 55511-2013: Pipeline valves. Electric actuators. General specifications
GOST R 55736-2013: Mining equipment. Machines for drilling blast holes in open mountain developments. General technical requirements and test methods
OST 108.001.102-76: Products for export. General requirements
OST 24.030.45-74: Air heaters tubular steam stationary boilers. General technical conditions
OST 24.080.06-73: Unified protection system against corrosion and aging. Mining and coal equipment. Inorganic metallic and non-metallic coatings. Requirements for selection of types and thicknesses.
OST 26.260.01-2001: Steel enamel vessels and devices. General technical specifications.
OST 26-01-147-89: Drying devices with rotating drums. General technical requirements.Printing telegraph and terminals for document electric communication. Methods of printed character parameter measurement.
OST 26-04-280-93: Pipeline fittings of cryogenic equipment products. General specifications.
OST 26-07-2032-87: Pipeline fittings. General requirements to periodic tests.
OST 26-07-2051-82: Pipeline fittings. Climatic tests methods.
OST 26-07-596-72: Electric drives for pipeline fittings. Export including tropical climate countries. General requirements.
OST 34 001-73: Lifting equipment. Requirements for materials
OST 34 002-73: Equipment and general-purpose machines. Requirements for materials
OST 34 005-75: Specifications. The procedure for approval, approval and state registration
OST 34-13-959-88: Card of the technical level and product quality. Procedure of compilation and maintaining of the level card
OST 34-26-446-79: Setting of steam and hot water stationary boilers. General technical requirements
OST 48-286-86: Single-stage Thickeners. Specifications.
OST 48-41-91: Engineering products of non-ferrous metallurgy. General Specifications.
RD 26.260.010-2002: The leading document on standardization. The list of standard documentation on standardization on the cells and devices working under pressure.
RD 26.260.010-97: List of Regulatory Documents on Standardization for Pressure Vessels and Apparatus
RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.
RD 34.21.142: Guidelines for the Design of Steel Pipelines for Hydraulic Structures
RD 34.26.203: Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities
ST TsKBA 009-2007: Pipe fittings. Electrical connectors of electric drives for nuclear power plants. General technical conditions
ST TsKBA 028-2007: Pipe fittings. Periodic testing. General requirements
ST TsKBA 087-2010: Pipe fittings. Electric drives. General technical conditions
ST TsKBA 090-2013: Pipe fittings. Pneumatic actuators and hydraulic actuators. General technical conditions
STB 1831-2008: Gear pumps for volume hydraulic drive. Specifications
STB GOST R 52321-2007: Equipment for measurement of electrical power of alternating current. Particular requirements. Part 11. Electric and mechanical recorders of active energy of accuracy class: 0,5; 1 and 2
TU 16-674.073-86: Short circuit breakers of types KRN and KZ for voltage classes 35, 110, 150 and 220 KV
TU 26-01-949-85: The devices gummed with the mechanical mixing device of volume 1; 2; 3.2; 6.3; 10 and 16 m3
TU 26-01-957-85: Gummed capacitive devices
TU 26-02-1102-89: Shell and tube heat exchangers of increased thermal efficiency with an expander on the housing
TU 26-02-1105-89: Shell and tube heat exchangers with fixed tube sheets and shell and tube with a temperature compensator on the shell with a shell diameter of 159, 273, 325, 426 mm increased thermal efficiency. Technical conditions
TU 26-05-39-85: Ramp acetylene discharge with protective device PAP-15
TU 26-05-492-78: High pressure acetylene valves
TU 3113-028-00220302-01: Heaters of steam and water-to-water for heating networks of heating and hot water systems. Technical conditions
TU 36.22.19.05-005-85: Selective pressure measuring devices. Technical conditions
TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them
TU 3612-024-00220302-02: Shell and tube heat exchangers with fixed tube sheets and shell and tube with temperature compensator on the shell
TU 3612-100-00220302-2005: Shell and tube heat exchangers, tube bundles for them and heat exchangers "pipe in pipe". General technical conditions
TU 3615-044-00220302-02: Cylindrical horizontal reservoirs for liquid hydrocarbonic propane and butane gases
TU 3644-006-00220302-99: Shell-and-tube heat exchangers for special purposes. Refrigeration evaporators and condensers
TU 84-738-83: Gear pumps for pressure P = 0.5 MPa (5 kgf/cm2) for machine tools and other stationary machines
GOST 34452-2018: Disconnectors for the traction network of railways and their drives. General specifications
ST CKBA 097-2019: Pipe fittings. Test methods for resistance to climatic external factors
TU 24.09.683-88: Cabin crane unified KKU
Customers Who Viewed This Item Also Viewed:
 |
Locomotive and motor rolling stock. Requirements of fire safety
Language: English |
Unified system of design documentation. Operational documents
Language: English |
Unified system of design documentation. Rules for the implementation of operational documents
Language: English |
Noise. Admissible levels of noise in houses and public buildings
Language: English |
The list of buildings, constructions, rooms and equipment subject to protection by automatic extinguishing units and automatic fire alarm
Language: English |
Electrical equipment for a.c. voltages from 1 to 750 kV. Requirements for dielectric strength of insulation
Language: English |
Electrical articles. General requirement for environment mechanical stability
Language: English |
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English |
Machines for the pulp and paper industry
Language: English |
Unified system for design documentation. Rules for making exploitative documents
Language: English |
Electrical insulation system. Thermal evalution and classification
Language: English |
Loads and impacts
Language: English |
Direct-acting safety valves. General specifications
Language: English |
Cable lines. Circuit integrity under fire. Test method
Language: English |
Technical regulations of Customs Union. On the safety of agricultural and forestry tractors and trailers
Language: English |
Soils. Field test method by dynamic sounding
Language: English |
Flame arrestors and spark arrestors. General technical requirements. Test methods
Language: English |
Manufacturing of medicinal products. Processing equipment for manufacturing of solid dosage forms. General requirements
Language: English |
Vibration. Technological equipment of pulp and paper production. Protection methods and means
Language: English |
Steel. Methods of test and estimation of macrostructure
Language: English |
 |
|
YOUR ORDERING MADE EASY!
BelarusLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.