GOST 31294-2005

ГОСТ 31294-2005

Direct-acting safety valves. General specifications

Клапаны предохранительные прямого действия. Общие технические условия

Status: Valid - Supersedes

This standard applies to safety valves of direct action for general industrial use nominal diameters from DN 10 to DN 300 (inclusive) on the nominal pressure up to PN 400 (inclusive) for liquid and gaseous aggressive and non-aggressive media with temperatures from minus 110 degrees. C (163 K) to 600 degrees. C (873 K) designed to protect equipment from an emergency pressure increase by releasing (dumping) the medium from it into the atmosphere or into a low pressure system

Настоящий стандарт распространяется на предохранительные клапаны прямого действия общепромышленного назначения номинальных диамеров от DN 10 до DN 300 (включительно) на номинальное давление до PN 400 (включительно) для жидких и газообразных агрессивных и неагрессивных сред с температурой от минус 110 град. С (163 К) до 600 град. С (873 К), предназначенные для защиты оборудования от аварийного повышения давления выпуском (сбросом) среды из него в атмосферу или в систему низкого давления

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 31

Approved: Federal Agency for Technical Regulation and Metrology, 4/28/2008

SKU: RUSS20834

Price: $549.45




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 032/2013 TR CU. On safety of overpressure equipment » Regulations and standards (to 032/2013 TR CU) »

Standards for pipe fittings (TPA) » 11. Piping valves (TPA) tests » 11.2 Basic test procedures »

Standards for pipe fittings (TPA) » 2. Standards for general specifications » 2.4 Safety valves »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.1 Machinery, equipment and components for general engineering applications » 4.13.1.1 Components and assembly units for general engineering applications »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.060 Pipe fittings » 23.060.01 Pipe fittings in general »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.060 Pipeline valves » 23.060.01 Pipe fittings in general »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G1 General parts and units of machines » G18 Fittings and pipeline connections »


As a Replacement Of:

GOST 12532-88: Direct-acting safety valves. Main parameters

GOST 9789-75: Safety spring full-lifted flanged steel valves for p stip "1.6 and 4.0 MPa (16 and 40 kgf/cm2)

The Document References:

GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles

GOST 1.2-97: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Procedure for development, taking over application, renovation and cancellation

GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications

GOST 10549-80: Screw thread runout. Washout threads, total thread runouts, undercuts and chamfers

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 12.2.063-81: Occupational safety standards system. Industrial pipeline valves. General safety requirements

GOST 12.2.085-2002: Vessels working under pressure. Safety valves. Safety requirements

GOST 12532-88: Direct-acting safety valves. Main parameters

GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces

GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements

GOST 12817-80: Cast grey iron flanges for Pnom from 0,1 to 1,6 MPa (from 1 to 16 kgf/sq sm). Design and dimensions

GOST 12818-80: Cast malleable iron flanges for Pnom from 1,6 to 4,0 MPa (from 16 to 40 kgf/cm2). Design and dimensions

GOST 12819-80: Cast steel flanges for Pnom from 1,6 to 20,0 MPa (from 16 to 200 kgf/sq sm). Design and dimensions

GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions

GOST 12821-80: Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions

GOST 14192-96: Cargo marking

GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions

GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits

GOST 162-90: Depth gauges. Specifications

GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions

GOST 16587-71: Safety valves, control valves and pressure regulators. Face-to-face lengths

GOST 166-89: Vernier callipers. Specifications

GOST 17433-80: Industrial purity. Compressed air. Grades of contamination

GOST 18322-78: Equipment maintenance and repair system. Terms and definitions

GOST 2.601-2006: Unified system for design documentation. Exploitative documents

GOST 2.602-2013: Unified system for design documentation. Repair documents

GOST 2.602-95: Unified system for design documentation. Repair documents

GOST 20736-75: Quality control. Sampling inspection by variables for normal distribution of inspected parameters

GOST 23170-78: Packing for products of engineering industry. General requirements.

GOST 24054-80: Engineering and instrument production items. Leak detection methods. General requirements

GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges

GOST 24297-2013: Verification of purchased product. Organization and methods of control

GOST 24297-87: Input inspection of products. General provisions.

GOST 24570-81: Safety valves of stream and hot-water boilers. Technical requirements

GOST 24642-81: Basic norms of interchangeability. Tolerances of form and position. Basic terms and definitions

GOST 24643-81: Basic norms of interchangeability. Tolerances of form and position of surfaces. Numerical values

GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions

GOST 24856-81: Industrial pipeline fittings. Terms and definitions

GOST 26304-84: Industrial pipeline valves supplied

GOST 26349-84: Tube connections and fittings. Nominal pressures. Series

GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 2822-78: Threaded ends of marine valves and fittings. Types, main characteristics and dimensions and technical requirements

GOST 28338-89: Nominal bores (nominal sizes)

GOST 2874-82: Drinking water. Hygienic requirements and quality control

GOST 29329-92: Balance for static weightings

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 30893.1-2002: Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications

GOST 30893.2-2002: Basic norms of interchangeability. General tolerances. Tolerances of form and position for features without individual tolerance indications

GOST 3242-79: Welded joints

GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 4666-75: Valves. Marking and distinctive painting

GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications

GOST 5890-78: Pipe connection with screwed ends. Specifications

GOST 6527-68: Female ends with pipe cylindrical thread. Dimensions

GOST 7505-89: Steel stamping forgings. Tolerances, allowances and forging laps

GOST 8.002-86: State system for ensuring the uniformity of measurements. State supervision and department control of measuring instruments. Basic regulations

GOST 8032-84: Preferred numbers and series of preferred numbers

GOST 8479-70: Structural carbon and alloy steel forgings

GOST 8908-81: Basic norms of interchangeability. Standard angles and angle tolerances

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9013-59: Metals. Method of measuring Rockwell hardness

GOST 9142-90: Boxes of corrugated board. General specifications

GOST 9150-2002: Basic norms of interchangeability. Metric screw threads. Profile

GOST 9399-81: Threaded steel flanges for Pn 20-100 MPa (200-1000 kgf/sq sm). Specifications.

GOST 9789-75: Safety spring full-lifted flanged steel valves for p stip "1.6 and 4.0 MPa (16 and 40 kgf/cm2)

GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture

GOST R 51232-98: Drinking water. General requirements for organization and quality control methods

GOST R 52720-2007: Pipeline valves. Terms and definitions

GOST R 52760-2007: Pipeline valves. Requirements for the marking and distinctive painting

GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests

GOST R 53442-2009: Basic norms of interchangeability. Geometrical product specifications. Tolerances of form, orientation, location and run-out

GOST R 53672-2009: Pipeline valves. General safety requirements

GOST R ISO 3951-1-2007: Statistical methods. Sampling procedures for inspection by variables. Part 1. Specification for single sampling plans indexed by acceptance quality limit for lot-by-lot inspection for a single quality characteristic and a single AQL

PR 50.2.002-94: Procedure for Government Metrological Inspection of the Manufacturing, Condition, and Application of Measuring Devices Certified Using Measurement Procedures, Standards, and Compliance with Metrological Standards and Codes

GOST 27.003-90: Reliability in engineering. Make-up and general rules for assigning reliability requirements

The Document is Referenced By:

GOST 12.2.063-2015: Pipeline valves. General safety requirements

GOST 12.2.085-2017: Pipeline valves. Safety valves. Selection and calculation of capacity

GOST 31812-2012: Civil aviation aircraft and helicopter ground support equipment. General technical requirements

GOST 31901-2013: Pipeline valves for nuclear stations. General specifications

GOST 33257-2015: Pipeline valves. Methods of control and testing

GOST 34069-2017: Gas supply system. Main pipeline gas transportation. Mobile compressor unit. Control and testing

GOST 34294-2017: Cryogenic pipeline valves. General specifications

GOST R 18.12.02-2017: Technology of the aviation fueling. Installation of the aviation fuel supply typical schemes.General technical requirements

GOST R 42.4.01-2014: Civil defence. Civil defence constructions. Test methods

GOST R 53402-2009: Pipeline valves. Methods of control and testing

GOST R 53543-2009: Aircraft and helicopter ground support equipment. General technical requirements

GOST R 53672-2009: Pipeline valves. General safety requirements

GOST R 55018-2012: Pipeline valves for objects of energetics. General specifications

GOST R 55472-2013: Gas distribution systems. Requirements for gas distribution networks. Part 0. General

GOST R 56001-2014: Pipeline valves for objects of gas industry. General specifications

GOST R 57217-2016: Medical multi-place hyperbaric chambers with operating pressure 1, 0 MPa. General technical requirements

ST TsKBA 007-2004: Pipe fittings. Organizing and conducting an industrial safety review of pipeline valves operated at hazardous production facilities

ST TsKBA 081-2009: Pipe fittings. Passport Recovery Procedure

ST TsKBA 082-2009: Pipe fittings. Input control

GOST R 55472-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 0. General

GOST R 58367-2019: Arrangement of oil fields on land. Technological design

Customers Who Viewed This Item Also Viewed:

Locomotive and motor rolling stock. Requirements of fire safety
Language: English
Price: $321.75
Unified system of design documentation. Operational documents
Language: English
Price: $317.79
Unified system of design documentation. Rules for the implementation of operational documents
Language: English
Price: $384.12
Noise. Admissible levels of noise in houses and public buildings
Language: English
Price: $35.64
The list of buildings, constructions, rooms and equipment subject to protection by automatic extinguishing units and automatic fire alarm
Language: English
Price: $85.30
Electrical equipment for a.c. voltages from 1 to 750 kV. Requirements for dielectric strength of insulation
Language: English
Price: $543.51
Electrical articles. General requirement for environment mechanical stability
Language: English
Price: $75.24
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $262.35
Machines for the pulp and paper industry
Language: English
Price: $211.86
Unified system for design documentation. Rules for making exploitative documents
Language: English
Price: $187.11
Electrical insulation system. Thermal evalution and classification
Language: English
Price: $236.61
Loads and impacts
Language: English
Price: $577.17
Direct-acting safety valves. General specifications
Language: English
Price: $549.45
Cable lines. Circuit integrity under fire. Test method
Language: English
Price: $75.24
Technical regulations of Customs Union. On the safety of agricultural and forestry tractors and trailers
Language: English
Price: $98.40
Soils. Field test method by dynamic sounding
Language: English
Price: $254.14
Flame arrestors and spark arrestors. General technical requirements. Test methods
Language: English
Price: $129.69
Manufacturing of medicinal products. Processing equipment for manufacturing of solid dosage forms. General requirements
Language: English
Price: $244.53
Vibration. Technological equipment of pulp and paper production. Protection methods and means
Language: English
Price: $167.31
Steel. Methods of test and estimation of macrostructure
Language: English
Price: $627.26

YOUR ORDERING MADE EASY!

BelarusLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!