GOST 25941-83

ГОСТ 25941-83

Rotating electrical machines. Methods for determining losses and efficiency

Машины электрические вращающиеся. Методы определения потерь и коэффициента полезного действия

Status: Superseded in part. Registration information 972-st dated September 6, 2013 (official website of Rosstandart); IUS 2-2015

The standard applies to rotating DC and AC electrical machines without limiting power, voltage and frequency and establishes methods for determining losses and efficiency.

Стандарт распространяется на вращающиеся электрические машины постоянного и переменного тока без ограничения мощности, напряжения и частоты и устанавливает методы определения потерь и коэффициента полезного действия.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 52

Approved: USSR State Committee for Standards, 10/14/1983

SKU: RUSS20514

Price: $118.80




The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.15 Testing and control of products of electronic, optical and electrical industry » 4.15.1 Electric machines, electrical equipment and materials »

ISO classifier » 29 ELECTRICAL ENGINEERING » 29.160 Electric rotating machines » 29.160.01 Machines rotating in general »

National standards » 29 ELECTRICAL ENGINEERING » 29.160 Electric rotating machines » 29.160.01 Machines rotating in general »

National Standards for KGS (State Standards Classification) » Latest edition » E Power and electrical equipment » E6 Electric machines, transformers and converters » E69 Test methods. Packaging. Marking »


The Document References:

GOST 10159-79: Rotating electrical commutator machines. Test methods

GOST 10169-77: 3-phase synchronous machines. Test methods

GOST 11828-86: Rotating electrical machines. General test methods

GOST 7217-87: Rotating electrical machines. Asynchronus motors. Test methods

GOST 8865-93: Electrical insulation system. Thermal evalution and classification

The Document is Referenced By:

GOST 10159-79: Rotating electrical commutator machines. Test methods

GOST 12049-75: D. C. Motors for floor railless electrified transport trucks. General specifications

GOST 14965-80: Three-phase synchronous generators of power over 100 kw

GOST 15880-83: Electric drills

GOST 15880-96: Electric drills. General specifications

GOST 16264.0-85: Low-power electric motors

GOST 17493-80: Electric machine frequency converters with power rating 250 kw up

GOST 18058-80: Three-phase asynchronous squirrel-cage submersible electric motors series ПЭД. Specifications

GOST 18200-79: Three-phase synchronous motors with power rating 110 kW and above. General specifications

GOST 18200-90: Above 200 kW rotating electric machines. Synchronous engines. General specifications

GOST 22407-85: Synchronous explicit-pole generators of general purpose

GOST 2582-2013: Rotating electrical traction machines for rail and road vehicles. General technical specifications.

GOST 2582-81: Electric rotatory traction machines

GOST 28173-89: Rotating electrical machines. Rating and performance

GOST 28330-89: Asynchronous electrical machines with power from 1 to 400 kw inclusive. Motors

GOST 29285-92: Reducers and motor-reducers. General requirements to the methods of experiments

GOST 30195-94: Submersible asynchronous electric motors

GOST 304-82: Welding generators.

GOST 31606-2012: Rotating electrical machines. Asynchronous motors of power from 0,12 to 400 kW inclusive. General technical requirements

GOST 533-2000: Rotating electrical machinery. Turbo-generators. General specifications

GOST 5616-89: Water-wheel electrical generators and motor-generators

GOST ISO 8528-6-2011: Reciprocating internal combustion engine driven alternating current generating sets. Part 6. Test methods

GOST R 50034-92: Electromagnetic compatibility. Asynchronous motors of voltage about 1000 V. Limits and test methods on immunity to electromagnetic disturbance

GOST R 50735-95: Alternating-current generators from 2 to 30 kW for power take-off from motors of moving means. General specifications

GOST R 51689-2000: Rotating electrical machines. Asynchronous motors of power from 0,12 to 400 kW inclusive. General technical reguirements

GOST R 52350.15-2005: Electrical apparatus for explosive gas atmospheres. Part 15. Construction, tests and marking of type of protection "n" electrical apparatus

GOST R 52776-2007: Rotating electrical machines. Rating and performance

GOST R 53471-2009: Synchronous three-phase generators of power above 100 kW. General specifications

GOST R 53472-2009: Rotating electrical machines. Asynchronous motors. Test methods

GOST R 54466-2011: Rotating electrical machines. Asynchronous explosion-proof motors of power from 0,25 to 400 kW inclusive. General technical requirements and test methods

GOST R 55007-2012: Stationary diesel and gas fuelled power plants. Energy efficiency

GOST R 56125-2014: Renewable power engineering. Hydropower engineering. Electromechanical equipment guide for small hydroelectric installations

GOST R 56624-2015: Energy efficiency. Submersible bladed pumps and electric motors for oil production. Energy efficiency classes

GOST R 56830-2015: Petroleum and natural gas industries. Electrical submersible pump units. General technical requirements

GOST R ISO 8528-6-2005: Reciprocating internal combustion engine driven alternating current generating sets. Part 6. Test methods

GOST R ISO 8528-7-2007: Reciprocating internal combustion engine driven alternating current generating sets. Part 7. Technical declarations for specification and design

PR 32.213-2003: Standardization Rules. Efficiency and power efficiency of diesel locomotives. Method of determination

ST RK 1518-2006: Diesel locomotives. DC electric rotating traction machines. Requirements for acceptance programmes and test procedures

ST RK 1531-2006: Locomotives of main railways of 1520 mm gage. AC electric rotating tractive machinery. Requirements for acceptance programmes and test procedures

TU 16-521.661-85: Single-phase asynchronous electric motor of the type DAK 86-60-3-H-IM8223-C18-POI-D18

TU 16-525.609-85: Asynchronous motors AIS80 - AIS112, supplied for export. Technical conditions

GOST 31610.15-2012: Electrical apparatus for explosive gas atmospheres. Part 15. Construction, test and marking of type of protection «n» electrical apparatus

GOST R IEC 60034-2-1-2009: Rotating electrical machines. Part 2-1. Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)

RD EO 1.1.2.01.0713-2013: Provisions on acceptance and testing form conformity assessment for nuclear plants.

Customers Who Viewed This Item Also Viewed:

Loads and actions
Language: English
Price: $638.55
Soil bases of buildings and structures
Language: English
Price: $3,161.07
Technical Regulations of the Eurasian Economic Union "On the Safety of Chemical Products"
Language: English
Price: $125.73
Technical regulations of the Eurasian Economic Union "On requirements for fire safety and fire extinguishing means"
Language: English
Price: $401.94
Voltage transformers. General specifications
Language: English
Price: $217.80
Current transformers. General specifications
Language: English
Price: $198.00
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $742.50
The list of buildings, constructions, rooms and equipment subject to protection by automatic extinguishing units and automatic fire alarm
Language: English
Price: $85.30
Commercial sulfur
Language: English
Price: $44.55
RF Government Resolution No. 87 dated 16.02.2008 'On composition of the design documentation sections and requirements for their content' (with amendments as of 21.04.2018)
Language: English
Price: $181.76
Control systems of an electric filter
Language: English
Price: $108.90
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $198.00
Government of the Russian Federation. Decree 16 of January 17, 2007. On the approval of the rates of the export customs duties on crude oil and on certain categories of goods manufactured from oil and exported from the territory of the Russian Federation beyond the borders of the member states of the agreements on the Customs Union
Language: English
Price: $10.50
Loads and impacts
Language: English
Price: $577.17
Cable lines. Circuit integrity under fire. Test method
Language: English
Price: $39.60
Building steel structures. General specifications
Language: English
Price: $173.25
Hard coals. Method for the determination of washability
Language: English
Price: $100.88
Brown coals, hard coals, anthracite and thermo anthracite. Methods for determination of mechanical strength
Language: English
Price: $116.40
Soils. Field test methods: cone penetration test and dynamic probing
Language: English
Price: $202.95
Soils. Field test method by dynamic sounding
Language: English
Price: $254.14

YOUR ORDERING MADE EASY!

BelarusLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!