RD EO 1.1.2.01.0713-2013

РД ЭО 1.1.2.01.0713-2013

Provisions on acceptance and testing form conformity assessment for nuclear plants.

Положение об оценке соответствия в форме приемки и испытаний продукции для атомных станций

Status: Effective

The Regulation defines the organization, procedure and basic principles of the activities of Rosenergoatom Concern OJSC, general contractors, suppliers, authorized organizations and manufacturing enterprises (the Russian Federation and abroad) when conducting conformity assessment in the form of

Положение определяет организацию, порядок и основные принципы деятельности ОАО «Концерн «Росэнергоатом», генподрядчиков, поставщиков, уполномоченных организаций и предприятий-изготовителей (Российской Федерации и зарубежных) при проведении оценки соответствия в форме приемки и/или испытаний продукции, предназначенной для использования на с��роящихся и действующих АЭС в составе элементов или в качестве элементов, отнесенных к 1, 2, 3 и 4 классам безопасности согласно НП 001

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 64

Approved: Rosenergoatom Concern OJSC, 1/27/2014

SKU: RUSS126508

Price: $390.81


The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Regulatory documents of supervisory authorities » Normative documents of Gosatomnadzor of Russia »

Standards for pipe fittings (TPA) » 15. Quality and conformity assessment »

Standards for pipe fittings (TPA) » 3. Piping valves (TPA) standards for industries » 3.1 For energy » 3.1.1 For nuclear power »

PromExpert » SECTION I. TECHNICAL REGULATION » IV Conformity assessment of products and services » 1 Key points infield of conformity assessment »

PromExpert » SECTION I. TECHNICAL REGULATION » III Quality » 2 Product quality assurance » 2.3 Quality Management » 2.3.1 Fundamentals of quality management »

ISO classifier » 27 ENERGY AND HEATING TECHNOLOGY » 27.120 Nuclear power engineering » 27.120.20 Nuclear power plants. Security »


As a Replacement Of:

RD EO 1.1.2.01.0713-2008: Regulation on quality control of manufacturing of equipment for nuclear power plants

The Document References:

GOST 10032-80: Stationary, mobile or marine auxiliary diesel generators

GOST 10121-76: Selectively purified transformer oil

GOST 10150-2014: Piston internal combustion engines. General specifications

GOST 10169-77: 3-phase synchronous machines. Test methods

GOST 10272-87: Double entry centrifugal pumps. Technical requirements

GOST 10407-88: Centrifugal multistage segmental pumps. Types and basic parameters

GOST 10434-82: Electric contact connections. Classification. General technical requirements

GOST 10693-81: Hermetic capacitor bushings designed for rated voltages 110 kv and more

GOST 11677-85: Power transformers

GOST 11828-86: Rotating electrical machines. General test methods

GOST 11920-85: General purpose oil-immersed power transformers rated for voltage up to 35 kv inclusively

GOST 11929-87: Rotating electrical machinery. General test methods. Noise levels determinations

GOST 12.1.003-2014: Occupational safety standards system. Noise. General safety requirements

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements

GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements

GOST 12.2.007.1-75: Occupation safety standards system. Rotating electric machines. Safety requirements

GOST 12.2.007.2-75: Occupation safety standards system. Power transformers and reactors. Safety requirements

GOST 12.2.007.3-75: Occupational safety standard system. Electrotechnical devices for voltage more than 1 000 v

GOST 12.2.007.4-75: Cabinets for switchgear and control gear and unitized transformer substations

GOST 12.2.024-87: Noise. Power oil-immersed transformers.

GOST 12052-90: Piston and plunger pumps. Range of basic parameters and dimensions

GOST 12450-82: Ac circuit breakers for the rated voltages from 110 to 750 kv

GOST 12965-85: General purpose oil-immersed power transformers rated for voltages 110 and 150 kv

GOST 13822-82: Generating sets and moving diesel-power stations. General specifications

GOST 14209-85: Oil-immersed general-purpose power transformers. Permissible loads

GOST 14254-2015: Degrees of protection provided by enclosures (IP Code)

GOST 15.005-86: Creation of articles manufactured individually or in small batches and assembled at the place of operation

GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions

GOST 1516.1-76: Electrical equipment for ac voltages of 3 to 500 kv

GOST 1516.3-96: Electrical equipment for a.c. voltages from 1 to 750 kV. Requirements for dielectric strength of insulation

GOST 16372-93: Rotating electric machines. Limiting values of noise levels

GOST 16772-77: Converter transformers and reactors. General specifications

GOST 17335-79: Positive displacement pumps

GOST 17494-87: Rotating electrical machines. Classification of degrees of protection provided by enclosures for rotating machines

GOST 17516.1-90: Electrical articles. General requirement for environment mechanical stability

GOST 17516-72: Electrical articles. Operating conditions as to environment mechanical aspects influence

GOST 17544-85: General purpose power oil transformers of voltage classes 220, 330, 500 and 750 kv

GOST 18322-78: Equipment maintenance and repair system. Terms and definitions

GOST 1983-2015: Voltage transformers. General specifications

GOST 20243-74: Power transformers. Methods of short-circuit tests

GOST 20439-87: Electric generating sets and mobile electric power stations with internal combustion engines. Requirements for reliability and control methods

GOST 20459-87: Rotating electrical machines. Means of cooling. Symbols.

GOST 20815-93: Rotating electrical machines. Mechanical vibration of certain machines with shaft heights 56 mm and higher. Measurement, evaluation and limits of the vibration severity

GOST 21128-83: Power supply systems, nets, sources, converters and receivers of electric energy. Rated voltages to 1000 V

GOST 21558-2000: Excitation system for turbo generators, hydrogenerators and synchronous condensers. General specifications

GOST 22247-96: Centrifugal and section pumps for handling water. Basic parameters and dimensions. Safety requirements. Control methods

GOST 22337-77: Centrifugal feed pumps. Basic parameters

GOST 22465-88: Centrifugal booster pumps. Main parameters

GOST 22756-77: Power and voltage transformers and reactors. Test methods of electric insulation strength

GOST 23660-79: System of technical maintenance and repair of equipment. Maintainability and reparability for item development

GOST 24126-80: Power transformer on-load tap-changing devices. General specifications

GOST 24277-91: Stationary steam turbines for nuclear power plants. General specifications

GOST 24297-2013: Verification of purchased product. Organization and methods of control

GOST 24464-80: Feeding pumps of power untis of nuclear power plants

GOST 24465-80: Condensate pumps of power-generating units at nuclear power stations

GOST 25364-97: Land-based steam turbine-generator sets. Evaluation of machine vibration by measurement on non-rotating parts and general requirements for the measurement of vibration

GOST 25941-83: Rotating electrical machines. Methods for determining losses and efficiency

GOST 26656-85: Technical diagnostics. Testability. General requirements

GOST 26772-85: Rotating electrical machines. Terminal markings and direction of rotation

GOST 27.003-2016: Reliability in technology. Composition and general rules for setting reliability requirements

GOST 27.410-87: Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability

GOST 27518-87: Diagnostics of items. General reguirements

GOST 3.1109-82: Unified system for technological documentation. Terms and definitions of main concepts

GOST 30830-2002: Power transformers. Part 1. General

GOST 31606-2012: Rotating electrical machines. Asynchronous motors of power from 0,12 to 400 kW inclusive. General technical requirements

GOST 31839-2012: Pumps and pump units for pumping of liquids. General safety requirements

GOST 31840-2012: Submersible pumps and pump units. Safety requirements

GOST 32137-2013: Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods

GOST 32144-2013: Electric energy. Electromagnetic compatibility of technical equipment. Power quality limits in the public power supply systems

GOST 32600-2013: Pumps. Shaft sealing systems for centrifugal and rotary pumps. General technical requirements and control methods

GOST 4.171-85: Product-quality index system. Turbo-generators, whater-wheel generators, synchronous condensers and their excitation systems. Nomenclature of indices

GOST 4.316-85: System of product-quality indices. Power, small, measuring transformer. Complete transformer substations. High-voltage bushings. Nomenclature of indices

GOST 533-2000: Rotating electrical machinery. Turbo-generators. General specifications

GOST 5862-79: Ceramic insulators and covers for voltage over 1000 V. General specifications

GOST 6000-88: Condensate centrifugal pumps. Parameters and dimensions

GOST 6134-2007: Rotodynamic pumps. Test methods

GOST 721-77: Power supply systems, networks, sources,converters and receivers of electric energy. Rated voltages above 1000 V

GOST 7217-87: Rotating electrical machines. Asynchronus motors. Test methods

GOST 7746-2015: Current transformers. General specifications

GOST 8865-93: Electrical insulation system. Thermal evalution and classification

GOST 9630-80: Three-phase asynchronous motors. General specifications.

GOST 9920-89: A.c. electrical installations for voltage from 3 to 750 kV. Creepage distance of external insulation

GOST IEC 60034-5-2011: Rotating electrical machines. Part 5. Classification of protection degrees provided by the integral design of rotating electrical machines (IP code)

GOST ISO 9001-2011: Quality management systems. Requirements

GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture

GOST R 15.301-2016: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture

GOST R 21.1001-2009: System of design documents for construction. General principles

GOST R 51757-2001: 3-phase induction motors of voltage over 1000 V for auxiliaries of thermal power stations. General specifications

GOST R 52565-2006: Alternating-current circuit-breakers for voltages from 3 to 750 kV. General specifications

GOST R 52719-2007: Power transformers. General specifications

GOST R 52776-2007: Rotating electrical machines. Rating and performance

GOST R 52857.7-2007: Vessels and apparatus. Norms and methods of strength calculation. Heat-exchangers

GOST R 53472-2009: Rotating electrical machines. Asynchronous motors. Test methods

GOST R 54804-2011: Centrifugal pumps. Technical specifications. Class III

GOST R 54805-2011: Centrifugal pumps. Technical specifications. Class II

GOST R 54806-2011: Centrifugal pumps. Technical specifications. Class I

GOST R 55187-2012: Insulated bushings for alternating current rated voltages above 1000 V. Common specifications

GOST R 55195-2012: Electrical equipment and installations for a.c. voltages from 1 up to 750 kV. Requirements for dielectric strength of insulation

PB 03-273-99: Rules for qualification test of welders and welding production specialists

PB 03-440-02: Attestation rules for nondestructive inspection personnel

PNAE G-01-011-97: General Safety Regulations for nuclear thermal power plants (SSB 88/97). Also known as NP-001-97.

PNAE G-7-003-87: Certification Requirements for Welders of Equipment and Piping for Nuclear Power Plants

PNAE G-7-008-89: Regulations for design and safe operation of equipment and piping of atomic power plants

PNAE G-7-009-89: Equipment and pipelines of nuclear power installations. Welding and overlaying, general provisions

PNAE G-7-010-89: Equipment and pipelines of nuclear energy facilities. Welded joints and beads. Testing rules

PNAE G-7-016-89: Standardized methods of control of basic materials (semifinished products), welded joints and cladding of equipment and of pipelines of NPP. Visual and a measuring control

PNAE G-7-025-90: Steel castings for nuclear plants. Rules of control

PNST 164-2016: Electric equipment for nuclear power plants. General technical requirements

PNST 165-2016: Electric generating sets for nuclear plants with internal combustion engines. General specifications. Рlacement requirements

PNST 166-2016: Safety class 4 pipeline valves for technological systems of nuclear stations. General technical requirements

RB 089-14: Safety guide on nuclear energy use. Unified control procedures of base materials (semi-products), weld joints and build-ups of equipment and pipelines of nuclear energy plants. Visual and measuring testing.

RD 03-36-2002: Terms of supply of imported equipment, goods, materials and components for nuclear facilities, radiation sources and storage of the Russian Federation

RD 24.022.09-87: The leading document. Branch system of production technological preparation. Rules. Checks of the equipment on technological accuracy.

RD EO 1.1.2.01.0713-2008: Regulation on quality control of manufacturing of equipment for nuclear power plants

RD EO 1.1.2.01.0740-2008: Technical documentation. Regulations on the procedure for the development, registration and accounting solutions (technical solutions)

RG 1.3.3.99.0018-2015: Regulation of the interaction of Rosenergoatom Concern OJSC and Engineering Company (NPP General Designer) in the coordination of technical specifications and specifications for NPP equipment

Federal Law 184-FZ: About technical regulation

PNAJe G-7-002-86: Standards for calculating the strength of equipment and pipelines of nuclear power plants

RD EO 1.1.2.01.0740-2012: Technical documentation. Regulation on the development, registration and accounting of decisions (technical solutions)

RD EO 1.1.2.01.0930-2013: Regulation on management of inconsistencies during manufacture and incoming inspection of the products for NPPs

RD EO 1.1.2.01.0931-2013: Main provisions of incoming production inspection at nuclear power plants

RD EO 1.1.2.01.0958-2014: Coordination of specifications and decisions related to applying import products intended for use at nuclear power generating stations. Regulation.

RD EO 1.1.2.05.0929-2013: Guidelines for acceptance inspections at manufacturing plants and entrance control at NPP of 1st, 2nd and 3rd security class equipment

The Document is Referenced By:

MU 1.2.3.07.0057-2016: Composition and scope of tests of special pipeline valves and actuators for nuclear power plants. Methodical instructions

RD EO 1.1.2.01.0075-2015: Safety stock of equipment, components and spare parts for unplanned repairs at nuclear power plants. Position

RD EO 1.1.2.01.0086-2014: Quality Assurance in the Repair of Nuclear Power Plant Systems and Equipment. Main provisions

RD EO 1.1.2.29.0952-2014: Production certification procedure

RD EO 1.1.2.29.0954-2014: The procedure for analyzing documentation for equipment supplied to nuclear power plants

OT 1.1.8.02.1177-2016: Quality assurance program in the development and manufacture of products supplied to nuclear power plants. Content and Development Requirements

OTT 1.1.3.10.1446-2018: Atom stations. Control systems important to safety. Creation, modernization and operation. General technical requirements

RD EO 1.1.2.01.0958-2014: Coordination of specifications and decisions related to applying import products intended for use at nuclear power generating stations. Regulation.

RD EO 1.1.2.05.0929-2013: Guidelines for acceptance inspections at manufacturing plants and entrance control at NPP of 1st, 2nd and 3rd security class equipment

RD JeO 1.1.2.01.0308-2015: The procedure for the collection, processing, storage and transmission of information about failures and damage to equipment of nuclear power plants. Position

RD JeO 1.1.2.01.0573-2019: Conducting inspections of the implementation of quality assurance programs of Rosenergoatom Concern JSC and organizations performing work and providing services to the operating organization. Position

Customers Who Viewed This Item Also Viewed:

Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Steering gears. Industrial purity requirements.
Language: English
Price: $1,375.40
Pipeline valves. Leakage rates of valves.
Language: English
Price: $198.99
Pipeline valves. Swing and lift check valves. General specifications
Language: English
Price: $202.95
Pipelines valves. Jackets of oval, octagonal section, lens steel for valves flanges. Design, dimension and general technical requirements
Language: English
Price: $57.42
Heat-resistant spiral-wound gaskets. Types. Main dimensions
Language: English
Price: $79.20
Slinging arrangements for vessels and apparatus. Specifications
Language: English
Price: $217.80
Electrical apparatus for explosive gas atmospheres. Part 20. Data for flammable gases and vapours, relating to the use of electrical apparatus
Language: English
Price: $180.08
Rolling bearings. Static load rating
Language: English
Price: $237.60
Medical instruments, apparatus and equipment. General specifications
Language: English
Price: $286.95
Electromagnetic compatibility of technical equipment. Immunity tests. General introduction
Language: English
Price: $435.60
High-pressure welded steel vessels. General technical requirements
Language: English
Price: $763.29
Rolling bearings. Dynamic load ratings and rating life
Language: English
Price: $358.48
Safety manual “recommendations for the design and safe operation of the process pipelines”
Language: English
Price: $644.67
Technical regulations of Customs Union. On the safety of agricultural and forestry tractors and trailers
Language: English
Price: $98.40
Petroleum and natural gas industries. Shell-and-tube heat eхchangers. Technical requirements
Language: English
Price: $175.23
Mineral fertilizers. Method for determination of granules static strength
Language: English
Price: $69.84
Sulphur for industrial use. Sampling and preparation of samples
Language: English
Price: $44.55
Safety of machinery. Requirements for justification of safety
Language: English
Price: $167.46

YOUR ORDERING MADE EASY!

BelarusLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!