|
RD 153-34.1-39.504-00
РД 153-34.1-39.504-00
|
|
General technical requirements for fittings of CHP plant ( TPP OTT - 2000).
Общие технические требования к арматуре ТЭС (ОТТ ТЭС-2000)
Status: Effective - Introduced for the first time
The document contains a set of requirements that should guide the assessment of compliance with the actuators purchased by enterprises of the industry (valves and electric drives) to the conditions of their operation in thermal power plants. General technical requirements (OTT TPP-2000) should be used when approving specifications for actuators developed for the needs of the industry, by design organizations when assembling designed power plants with actuators, and also by power utilities when acquiring new actuators.
Документ содержит комплекс требований, которыми следует руководствоваться при оценке соответствия приобретаемых предприятиями отрасли исполнительных устройств (арматуры и электроприводов) условиям их эксплуатации на тепловых электростанциях. Общие технические требования (ОТТ ТЭС-2000) должны быть использованы при согласовании технических условий на исполнительные устройства, разрабатываемые для нужд отрасли, проектными организациями при комплектовании проектируемых электростанций исполнительными устройствами, а также энергопредприятиями при приобретении новых исполнительных устройств.
Choose Language:
Format: Electronic (pdf/doc)
Page Count: 21
Approved: RAO UES of Russia,
2/9/2000
SKU: RUSS126088
|
The Product is Contained in the Following Classifiers:
Power industry »
39. Pipelines, fittings »
Welding regulations »
Welding work »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Surfacing »
Standards for pipe fittings (TPA) »
14. Operation and repair of injection molding machines »
14.3 Repair of injection molding machines »
Standards for pipe fittings (TPA) »
14. Operation and repair of injection molding machines »
14.2 Maintenance »
Standards for pipe fittings (TPA) »
3. Piping valves (TPA) standards for industries »
3.1 For energy »
3.1.2 For thermal power »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.1 Machinery, equipment and components for general engineering applications »
4.13.1.1 Components and assembly units for general engineering applications »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.060 Burners. Boilers »
27.060.01 Burners and boilers in general »
The Document References:
GOST 12.2.020-76: Explosion proof electrical apparatus. Terms and definitions. Classification. Marking
GOST 12.2.085-82: Vessels working under pressure. Safety valves. Safety requirements
GOST 12997-84: SSI Products. General specifications
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 14691-69: Control devices for automatic regulation systems. Terms
GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions
GOST 17516.1-90: Electrical articles. General requirement for environment mechanical stability
GOST 24570-81: Safety valves of stream and hot-water boilers. Technical requirements
GOST 27883-88: Industrial process measurement and control equipment. Reliability. General requirements and test methods
GOST 5152-84: Gland Packing Specifications
GOST 7192-89: Constant-speed electrical actuating mechanisms, ssi
GOST 8865-93: Electrical insulation system. Thermal evalution and classification
GOST 9544-93: Pipeline cut-off valves
OST 108.940.02-82: Welded joint Seams of thermal power plants pipelines. Types and main dimensions.
PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping
PB 10-115-96: Regulations of design and safe operation of pressure vessels
RD 2730.940.103-92: Steam and hot water boilers, steam and hot-water-pipelines. Welding. General requirements.
The Document is Referenced By:
GOST R 55018-2012: Pipeline valves for objects of energetics. General specifications
Manual: Manual for impulse and low consumption fire extinguishing systems
RD 153-34.1-39.605-2002: General Requirements and Guidelines for Use of Thermally Expanded Graphite Seals in Thermal Power Station Valves
ST TsKBA 082-2009: Pipe fittings. Input control
|
Customers Who Viewed This Item Also Viewed:
 |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Technical Regulations of the Eurasian Economic Union "On the Safety of Chemical Products"
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Technical Regulations of Customs Union, On safety of machines and equipment
Language: English |
Determination of categories of rooms, buildings and external installations for explosion and fire hazards
Language: English |
Basic and safety principles for man-machine interface, marking and identification. Identification of conductors by colours and alphanumerics.
Language: English |
Railway rails. General specifications.
Language: English |
Technical regulations of Customs Union. On the safety of a personal protective equipment
Language: English |
Technical regulations of Customs Union. On the safety of agricultural and forestry tractors and trailers
Language: English |
Rostehnadzor (RTN) Order N 116 of 25.03.2014 "On approval of the Federal rules and regulations in the field of industrial safety". Rules of industrial safety of hazardous production facilities that use equipment operating under excess pressure. Reg. № 323
Language: English |
Non-destructive testing. Capillary methods. General requirements
Language: English |
Steel and alloys. Methods for detection and determination of grain size
Language: English |
Classification of automobile roads. General parameters and requirements
Language: English |
Raw material and food-stuff. Method for determination of arsenic
Language: English |
Nickel, nickel and copper-nickel alloys treated by pressure. Grades
Language: English |
Steel. Metallographic methods for the determination of non-metallic inclusions
Language: English |
Stationary steam and hot-water boilers and heat recovery steam generators. Weld joints. Quality control. General requirements
Language: English |
Jet fuels. Specifications
Language: English |
Power cables with plastic insulation for rated voltages from 6 up to and including 35 kV. General specifications
Language: English |
Low-voltage electrical installations. Part 5-52. Selection and erection of electrical equipment. Wiring systems
Language: English |
 |
|
YOUR ORDERING MADE EASY!
BelarusLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
