STB RB

STB EN 1822-4-2014
STB EN 1822-4-2014
High-performance air filters (EPA, HEPA and ULPA). Part 4. Determination of leakage of filter elements (scan method)
STB EN 1822-5-2014
STB EN 1822-5-2014
High-performance air filters (EPA, HEPA and ULPA). Part 5. Determination of the filter elements effectiveness
STB EN 196-5-2014
STB EN 196-5-2014
Cement Test Methods. Part 5. Determination of the hydraulic activity of pozzolanic cements
STB EN 356-2014
STB EN 356-2014
Glass in construction. Safe glazing. Manual test methods and manual cracking resistance classification
STB EN 410-2014
STB EN 410-2014
Glass in construction. Determination of lighting performance and physical properties of solar radiation by glazing
STB EN 413-1-2014
STB EN 413-1-2014
Cement for plaster and masonry mortars. Part 1. Composition, technical requirements and compliance criteria
STB EN 446-2014
STB EN 446-2014
Injection mortar for prestressed concrete structures. Injection methods
STB EN 447-2014
STB EN 447-2014
Injection mortar for prestressed concrete structures. Primary requirements
STB EN 455-3-2014
STB EN 455-3-2014
Disposable medical gloves. Part 3. Requirements and conduct of biological assessment
STB EN 58-2014
STB EN 58-2014
Bitumens and bituminous binders. Bitumen binders sampling
STB EN 673-2014
STB EN 673-2014
Glass in construction. Determination of heat transfer coefficient (U value). Calculation method
STB EN 674-2014
STB EN 674-2014
Glass in construction. Determination of heat transfer coefficient (U value) using a device equipped with a hot plate with a security zone
STB EN 675-2014
STB EN 675-2014
Glass in construction. Determination of heat transfer coefficient (U value) using an instrument equipped with a heat flux converter (heat meter)
STB EN 771-2-2014
STB EN 771-2-2014
Requirements for products for masonry. Part 2. Products made of dense silicate concrete
STB EN 771-3-2014
STB EN 771-3-2014
Requirements for products for masonry. Part 3. Concrete products on dense and porous aggregates
STB EN 771-4-2014
STB EN 771-4-2014
Requirements for products for masonry. Part 4. Autoclaved aerated concrete products
STB EN 771-5-2014
STB EN 771-5-2014
Requirements for products for masonry. Part 5. Products from dense concrete
STB EN 772-11-2014
STB EN 772-11-2014
Test methods for masonry products. Part 11. Determination of capillary water absorption of concrete products, cellular concrete autoclaved, natural stone and ceramic products
STB EN 772-1-2014
STB EN 772-1-2014
Test methods for masonry products. Part 1. Determination of compressive strength
STB EN 772-16-2014
STB EN 772-16-2014
Test methods for masonry products. Part 16. Dimensioning
STB EN 772-18-2014
STB EN 772-18-2014
Test methods for masonry products. Part 18. Determination of frost resistance of silicate products
STB EN 772-21-2014
STB EN 772-21-2014
Test methods for masonry products. Part 21. Determination of water absorption of ceramic and silicate products in cold water
STB EN 779-2014
STB EN 779-2014
Air filters for general ventilation. Determination of filtration efficiency
STB EN 844-12-2014
STB EN 844-12-2014
Timber of round type and lumber. Vocabulary. Part 12. Additional terms and general term index
STB EN 844-2-2014
STB EN 844-2-2014
Timber of round type and lumber. Vocabulary. Part 2. General terms and definitions for round timber
STB EN 844-4-2014
STB EN 844-4-2014
Timber of round type and lumber. Vocabulary. Part 4. Moisture. Terms and definitions
STB EN 844-5-2014
STB EN 844-5-2014
Timber of round type and lumber. Vocabulary. Part 5. Terms and definitions for sizes of round timber
STB EN 844-7-2014
STB EN 844-7-2014
Timber of round type and lumber. Vocabulary. Part 7. Terms and definitions of anatomical structure
STB EN 927-1-2014
STB EN 927-1-2014
Paints and varnishes. Varnish-and-paint systems for outdoor wooden surfaces. Part 1. Classification and selection
STB EN 932-3-2014
STB EN 932-3-2014
Methods for determining the basic indicators of placeholders. Part 3. Testing and terminology of simplified petrographic studies
STB EN 934-6-2014
STB EN 934-6-2014
Additives for concrete, mortar and injection mortar. Test methods. Part 6. Sampling, control and conformity assessment
STB EN 948-2014
STB EN 948-2014
Rotary hinged doors. Determination of torsion resistance under static load
STB EN ISO 10077-1-2014
STB EN ISO 10077-1-2014
Thermotechnical properties of windows, doors and shutters. Calculation of heat transfer coefficient. Part 1. General Provisions
STB EN ISO 10077-2-2014
STB EN ISO 10077-2-2014
Thermotechnical properties of windows, doors and shutters. Calculation of heat transfer coefficient. Part 2. Numerical method for frames
STB EN ISO 12567-1-2014
STB EN ISO 12567-1-2014
Thermotechnical properties of windows and doors. Determination of heat transfer coefficient using a climate chamber. Part 1. Windows and doors
STB EN ISO 12567-2-2014
STB EN ISO 12567-2-2014
Thermotechnical properties of windows and doors. Determination of heat transfer coefficient using a climate chamber. Part 2. Dormers and other protruding windows
STB ETSI EN 302 217-1-2014
STB ETSI EN 302 217-1-2014
Radio communication systems of fixed service. Characteristics and parameters for equipment and receivers. Point-Point Systems. Part 1. Review and system independent general characteristics
STB IEC 60645-1-2014
STB IEC 60645-1-2014
Electric acoustics. Audiometric equipment. Part 1. Tone audiometers
STB IEC 61280-1-3-2014
STB IEC 61280-1-3-2014
Test procedures of fiber-optic communication subsystems. Part 1-3. Communication subsystems of general purpose. Gauging of central wave length and spectral width
STB IEC 61508-1-2014
STB IEC 61508-1-2014
Functional safety of electric, electronic, programmable electronic systems related to safety. Part 1. General requirements
STB IEC 61508-2-2014
STB IEC 61508-2-2014
Functional safety of electric, electronic, programmable electronic systems related to safety. Part 2. Requirements to electric, electronic, programmable electronic systems related to safety
STB IEC 61508-3-2014
STB IEC 61508-3-2014
Functional safety of electric, electronic, programmable electronic systems related to safety. Part 3. Software requirements
STB IEC 61508-4-2014
STB IEC 61508-4-2014
Functional safety of electric, electronic, programmable electronic systems related to safety. Part 4. Terms, definitions and abbreviations
STB IEC 62129-2014
STB IEC 62129-2014
Railroads. Warning and information processing communication systems. Software for control and protection systems of railways
STB IEC/TR 60825-13-2014
STB IEC/TR 60825-13-2014
Laser products safety. Part 13. Gaging for classification exercise of laser products
STB ISO 10301-2014
STB ISO 10301-2014
Water quality. Determination of content of high volatile halogenated hydride by gas chromatography
STB ISO 10540-2-2014
STB ISO 10540-2-2014
Fats and animal and agricultural oils. Determination of phosphorus content. Part 2. Atomic absorption spectrometry method using graphite furnace
STB ISO 12543-1-2014
STB ISO 12543-1-2014
Glass in construction. Laminated glass and laminated safety. Part 1. Terms and definitions, description of the main components

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!